You can drill holes in concrete with a regular drill. … You will need a bit more patience and a wider array of drill bits when using a regular drill, but the procedure is the same for drilling in concrete regardless if you use a regular drill or a hammer drill.
Hammer drills and rotary hammers are both excellent for drilling masonry. … Sure, you can drill a hole or two in a concrete block with a regular drill and a masonry bit, but you’ll want to step it up a notch if you have a whole bunch of holes to drill into 50-year-old concrete.
Subsequently, Can I drill into cinder block with a regular drill?
A standard drill with a drill bit engineered for wood or metal is not up to this job. Select a drilling spot on the block. On most cinder blocks, only the ends and center portion of the block are solid. … Use a bit that is long enough to drill completely through the block.
Also, Can you use a regular drill for Tapcon?
YES!! You don’t need a hammer drill to make holes in concrete, just a regular drill, a cheap carbide bit (which may not survive) and patience. Use Tapcon screws–they rock!
Can I use wood drill bit on concrete?
It’s like anything else with tools, right tool for the job, and a wood/soft metal bit is the wrong tool to drill into concrete. Masonry bits are not all that expensive and you will always have need of them from time to time.
Last Review : 7 days ago.
How do you drill with a masonry bit?
Do you need a special drill for masonry?
You just need the tools and the right technique for how to drill into brick. Typically, all it takes is an ordinary drill to bore a few small 1″-deep holes (each a ¼-inch in diameter or less). Just buy a carbide-tipped masonry bit from your local hardware or home center and follow the steps below.
Can I screw into cinder block?
When the wall is cinder block, though, it can be a challenge to make those things stick. Because cinder block is hard like concrete, it’s no simple matter to nail or screw into it. Its surface is porous, so tape tends to pull away.
Can I use a wood bit on Masonry?
High-speed steel (HSS) drill bits can drill wood, fiberglass, polyvinyl chloride (PVC) and soft metals such as aluminum. … Carbide-tipped drill bits stay sharp much longer than steel, HSS or titanium bits. They’re effective for drilling tile and masonry.
What kind of drill can drill through concrete?
hammer drill
Can you use any drill bits with any drill?
Do all drill bits fit in all drills? No, not all drill bits fit in all drills. … ½” sized drills will accept up to ½” drill bit shafts as well as and 3/8” sized bits. Regular drill bits without a hex shanked bit holder cannot be used in an impact driver, however, hex shanked bits can be used in regular drill drivers.
How do you hang something heavy on a cinder block wall?
Hardwall hangers are heavy-duty plastic hooks that come with several embedded metal pins for attaching items to cinder blocks, mortar, and other hard materials. The pins are stepped back and ready for hammering.
Can you drill into concrete with a cordless drill?
In most cases, yes. While a cordless drill will not be as effective in drilling through concrete, it can get the job done. … A standard cordless drill has numerous applications when it comes to our home small projects, and surprisingly, it can be used to drill into stone or masonry.
Do Command Strips work on cinder block walls?
Surfaces. To what surfaces will Command™ Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. … The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood.
Do you need a special drill bit for cement?
Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a tungsten carbide tip are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps.
Can you use a masonry bit with a regular drill?
Hammer drills and rotary hammers are both excellent for drilling masonry. … Sure, you can drill a hole or two in a concrete block with a regular drill and a masonry bit, but you’ll want to step it up a notch if you have a whole bunch of holes to drill into 50-year-old concrete.
How do you drill a straight hole through concrete?
Push down with moderate pressure pull trigger drill to depth pull out bit kick away dustpile clean hole one more time with drill. Set anchor insert tool beat the hell out of it. DONE.
How do you hang a heavy mirror on a cinder block wall?
Concrete block walls provide a unique challenge to hanging mirrors, because you cannot simply nail or screw into them. Instead, you must use specialized expansion anchors, which expand when you insert a screw. This expansion causes the anchor to hold tight to concrete.
Will a regular drill bit work on concrete?
You can drill holes in concrete with a regular drill. Many people think that you cannot drill concrete with a regular drill. They believe that you need a special hammer drill with hardened drill bits. While these tools do make the job faster they are not necessary.
Can I use a regular drill for concrete?
You can drill holes in concrete with a regular drill. … You will need a bit more patience and a wider array of drill bits when using a regular drill, but the procedure is the same for drilling in concrete regardless if you use a regular drill or a hammer drill.
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.