Make sure that it is on a direct power source. Press the Shift+Control+Option keys at the left-side of the keyboard and the Power button on your Macbook Air, then hold those buttons down. Release those four buttons all at once and then press the Power button. This will turn on your Macbook Air.

Similarly, What do I do if my Mac screen is black and wont turn on?

Press and hold the power button for about 10 seconds. Press and release the power button, then immediately press and hold Command (⌘)-R until you see an Apple logo or other image. If you still see a blank screen after about 20 seconds, contact Apple Support.

Additionally, Why is my MacBook not charging when plugged in? Check the power outlet

If the power outlet works, connect your USB-C power adapter and try to charge your Mac. If your Mac still won’t charge, shut down your Mac and close the display for 30 seconds, then open the display and try to charge your Mac again. If you’re not using a Mac with Apple silicon, reset the SMC.

When I press the power button on my MacBook Pro nothing happens?

Verify both connections are tight. Ensure the power cord isn’t damaged. If nothing happens, try a different wall socket or check the one you’re using with a different device. If the outlet works, check the power cord or adapter.

How do I know if my MacBook Air is charging when its dead?

Instead, the easiest way to tell if you’re charging is to check your laptop screen and look for the battery status indicator at the top-right of the screen. If all you see is a battery level indicator, the laptop isn’t charging. If the battery icon has a lightning bolt in it, it’s charging.

Why did my Mac screen turn black?

Your Mac notebook computer may be out of power

If your Mac notebook computer’s screen goes black, but is not in sleep, it may be out of power. Plug the power adapter into the computer and into a power outlet. Unplug any devices that are connected to your computer, except the power adapter.

How do you start a Mac that won’t turn on?


If your Mac doesn’t turn on

  1. Press and hold the power button on your Mac for at least 10 seconds, then release. …
  2. If you see no change on your Mac, press and release the power button normally.
  3. If your Mac now turns on but doesn’t finish starting up, follow the steps for when your Mac doesn’t start up all the way.

How do I troubleshoot the black screen of death?


Repair a Black Screen of Death in Safe Mode

  1. Click Advanced options then Troubleshoot.
  2. From here go to Advanced options > Startup Settings > Restart.
  3. Select option 4, Enable Safe Mode.
  4. Wait for Windows Safe Mode to start.
  5. Once booted, press Windows + X.
  6. In the Quick Link menu select Device Manager.

How do I fix my MacBook battery not charging?


Fix MacBook not charging problem step-by-step

  1. Check charger output voltage.
  2. Check charging port and Magsafe connector.
  3. Reset SMC chip.
  4. Reset non-volatile random-access memory (NVRAM)
  5. Check battery connector.
  6. Replace the faulty battery.
  7. Check battery indicator circuit.
  8. Check faulty DC-in Board.

What do you do if your Mac is not charging?


MacBook “Not Charging” When It’s Plugged In?


Here’s How to Fix It

  1. Check your MacBook battery health. …
  2. Use the right power adapter.
  3. Reset the System Management Controller. …
  4. Inspect your adapter and charging port.
  5. Remove your MagSafe adapter horizontally.
  6. Speak to Apple about battery replacements and repairs.

Why is my laptop plugged in but not charging?

Batteries are susceptible to heat, so if your laptop is overheating, that could cause a problem. As the temperature rises, the battery sensor may misfire, telling the system that the battery is either fully charged or missing completely, causing the charging problems.

How do you fix a MacBook Pro that won’t turn on?


On a Mac laptop:

  1. Shut down the MacBook.
  2. Unplug and then reconnect the power cable.
  3. Press Shift + Ctrl + Option/Alt keys and the power button at the same time.
  4. Now release all those keys and the power button at the same time.
  5. You may see the light on the power cable flicker.
  6. Restart your MacBook.

How do I force start my Mac?

How to Force Restart Your Mac. Press and hold down the Command (⌘) and Control (Ctrl) keys along with the power button (or the ‌Touch ID‌ / Eject button, depending on the Mac model) until the screen goes blank and the machine restarts.

How long does it take to charge a MacBook from dead?

According to the Apple website, if the battery is at about 50 percent power, it should take about 1 hour to reach 80 percent full power, with an additional 2 hours to reach full power on trickle charge. If you charge the battery at 80 percent full power, it will take 2 hours to reach full power.

How do I revive a dead MacBook Air?

To get going, plug in the power cable and then press the Shift + Ctrl + Option/Alt keys and the power button simultaneously and hold them for at least 10-12 seconds. Next, release all the keys and then press the power button to try and restart your MacBook.

What is the cause of the black screen of death?

The notorious black screen of death (BSOD) can occur for a variety of reasons including overheating, update issues, a power supply issue and software or driver errors. Fortunately, you can repair it in most cases. If it happens more frequently, then you might have a hardware issue and should take it into a repair shop.

How do I stop my Mac screen from going black 2021?

Click and hold on the slider next to “Display sleep” and drag it to the right to increase the amount of time before the display goes to sleep. You can set it anywhere from 1 minute to 3 hours or “Never.”

Why did my Mac suddenly shut down?

Overheating, software errors, incorrect permissions and malfunctioning hardware can each cause a MacBook to suddenly shut itself down. Fixing software glitches or heating problems can often be fixed yourself at no cost, but if an internal component is malfunctioning, you may have to take the MacBook in for repair.

How do I force a Mac to start?

How to Force Restart Your Mac. Press and hold down the Command (⌘) and Control (Ctrl) keys along with the power button (or the ‌Touch ID‌ / Eject button, depending on the Mac model) until the screen goes blank and the machine restarts.

What to do if your computer turns on but the screen is black?

Fix 1: Force restart your computer

If all you see is a black screen after pressing the power button, try pressing the power button for 10 seconds to force shut down your PC, then turn it on. Doing this repeatedly for three times, the Windows Startup repair should launch automatically.

How do I fix my computer when the screen is black?


Troubleshoot black screen using clean boot

  1. Open Start.
  2. Search for msconfig and click the top result to open the System Configuration app.
  3. Click the Services tab.
  4. Check the Hide all Microsoft services option.
  5. Check one of the services. …
  6. Click the Apply button.
  7. Click the OK button.
  8. Restart the computer.

How do I start my computer with a black screen?

At your sign in screen when you fire up your PC, hold down your Shift key and click the power button at the bottom right of your screen, then select restart. If you can’t see anything because your screen is already black, then press the power button and reboot your machine again.

How do I reset my MacBook battery?


MacBook 2009 through 2017

  1. Shut down the computer.
  2. Disconnect the MagSafe power adapter from the computer, if it’s connected.
  3. Remove the battery.
  4. Press and hold the power button for 5 seconds.
  5. Release the power button.
  6. Reconnect the battery and MagSafe power adapter.
  7. Press the power button to turn on the computer.

How do I fix my battery plugged in but not charging?


Laptop Plugged In but Not Charging?


8 Tips to Solve Your Issue

  1. Remove the Battery and Connect to Power. …
  2. Make Sure You’re Using the Right Charger and Port. …
  3. Review Your Cable and Ports for Damage. …
  4. Reduce Resource Usage. …
  5. Check Windows and Lenovo Power Options. …
  6. Update or Reinstall Battery Drivers. …
  7. Get Another Laptop Charger.

How do I clean my Mac charging port?

Remove debris gently with a cotton swab or a soft bristle toothbrush, which provide the strength, flexibility, and precision for this task. Be careful not to get any cotton fibers stuck in the pin receptacle. You may use isopropyl alcohol to aid in cleaning the connectors as well.

General, knowledge