If you are not in a hurry to replace the earphone, read up some easy ways to troubleshoot and how to fix earphones with one side silent.
- Straighten out the earphone cord.
- Try another pair of earphones.
- Clean the headphone jack.
- Restart the device.
- Check the device audio settings.
- Check for the earphone damaged wires.
Similarly, Why is my right wireless earbud not working?
The easiest solution is to reset the wireless earphones. A factory reset will likely resolve any connectivity issues causing the problem. … Once reset, you’ll have to reconnect your wireless earbuds. In earbuds that don’t have the option to fully reset, simply disconnect the Bluetooth and connect again.
Additionally, Why is only one side of my earphones working? Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.
Why can I only hear out of one headphone?
If you only hear audio from the left side of your headphones, make sure the audio source has stereo output capability. IMPORTANT:A mono device will only output sound to the left side. Generally, if a device has an output jack labeled EARPHONE it will be mono, while an output jack labeled HEADPHONE will be stereo.
Why is my left earphone not working?
Test and Repair the Earphone Cable.
The first attempt you should make when your left earphone stops working is to test the cable. Your earphone’s tiny cable can be tested by inserting the earphone plug into your smartphone and make several bends with your fingers to detect a possible point of a cable break.
Why are only one of my wireless earbuds working?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds.
What happens when one earbud stops working?
If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.
How do I get my headphones to work in both ears?
Generally, you should be able to change this by going into Settings > Accessibility. Here you will see the Mono Audio option. Switching that on will ensure the full music and audio will play through one ear. And if that fails, you can just download an app that would allow this.
Why is my left earphone not working iPhone?
Check for debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. … Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
How do you fix one earphone not working on Apple?
Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted. least ten seconds, until the Apple logo appears. – Reset all settings Go to Settings > General > Reset and tap Reset All Settings.
How do you fix unbalanced headphones?
Some other popular ways to fix unbalanced headphones
- Regularly clean the headphone jack slot. Over time, dirt can build up in the headphone jack slot. …
- Restart your device (PC, Android device or IOS device) …
- Check your device with another headphone. …
- Make sure the mesh is well ventilated. …
- Check the wires.
Can you only hear out of one headphone on iPhone?
If your iPhone’s audio settings are improperly configured, you’ll likely hear one-sided playback. Turn off mono audio from the “Accessibility settings” to allow a left and right playback. … If this mode is enabled, you’ll only hear sound on one side of the headset.
How do I fix my left earphones not working?
Simple Fix To One Headphone not working Right/Left
- Jack not inserted properly. …
- Check your sound balance in device settings. …
- Mono sound setting. …
- Dirty Earbuds. …
- Inspect the wires for damage. …
- Problem with the device headphone slot. …
- Check for signs of water damage. …
- Re-pairing wireless headphones.
Why is my left earphone not working Iphone?
Check for debris, damage, or loose connections
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. … Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
How do I fix my earbuds if only one works?
Simple Fix To One Headphone not working Right/Left
- Jack not inserted properly. …
- Check your sound balance in device settings. …
- Mono sound setting. …
- Dirty Earbuds. …
- Inspect the wires for damage. …
- Problem with the device headphone slot. …
- Check for signs of water damage. …
- Re-pairing wireless headphones.
How do you get both wireless earbuds to work at the same time?
First, you will need to pair the earbuds to each other, then to the phone.
- Turn them both on at the same time, holding down the buttons until they flash red then blue.
- Once they both are flashing at the same time, you’ll double press a button on ONE earbud.
- The earbud will say it’s connected.
How do you pair both earbuds?
How to Connect Bluetooth Headphones to Android Phone
- First Open Settings. …
- Next, tap Connections.
- Then tap Bluetooth. …
- Then tap Scan at the top-right corner of your screen.
- Next, press and hold the power button on your headphones. …
- Finally, find your headphones and tap them.
How do I fix my left Apple earbud?
Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted. least ten seconds, until the Apple logo appears. – Reset all settings Go to Settings > General > Reset and tap Reset All Settings.
Why my left AirPod is not working?
If there’s no sound in one AirPod
Make sure that your charging case is fully charged. Place both AirPods in your charging case and let them charge for 30 seconds. … Play audio to test both AirPods. If an AirPod still isn’t working, reset your AirPods.
Why did my earbuds suddenly stop working?
Earphones/earbuds typically stop working due to wire strain, faulty wiring from the manufacturer, moisture damage, or damage to the drivers that produce the sound. These occurrences may cause shorts in the electrical flow of audio or complete disconnection between the drivers and the audio source.
How do you pair left and right earbuds?
First, you will need to pair the earbuds to each other, then to the phone.
- Turn them both on at the same time, holding down the buttons until they flash red then blue.
- Once they both are flashing at the same time, you’ll double press a button on ONE earbud.
- The earbud will say it’s connected.
Why does only one side of my headphones work on my iPhone?
If your iPhone’s audio settings are improperly configured, you’ll likely hear one-sided playback. Turn off mono audio from the “Accessibility settings” to allow a left and right playback. … If this mode is enabled, you’ll only hear sound on one side of the headset.
Why does only one of my earbuds work Apple?
Answer: A: Try going to Settings>General>Accessibility, and look under the Hearing Section. There is a place there to set the audio volume balance between the left and right channels. See that the slider is positioned in the center.