Apply SOCOLOR Cult directly to natural or pre-lightened clean, towel-dried hair. The lighter your starting level the brighter your end result will be. For best results apply to hair that is 80-100% dry. Apply with bowl and brush.
Similarly, How much developer do I mix with Matrix SoColor?
| SEMI-PERMANENT | 1-STEP PERMANENT | |
|---|---|---|
| MIXING RATIO | Direct Dyes |
1:2 – Cult : 30 Volume MATRIX Cream Developer |
| TIMING | ||
| Up to 30 minutes | Up to 20 minutes | |
| TIMING | Up to 30 minutes | Up to 35 minutes |
Additionally, How do you dye your hair with SoColor? For the same or darker hair tone level, use the lowest volume of cream developer, which is the 10-volume cream developer. Apply the mixture to your hair using a special applicator, a comb or a brush. Leave the dye on your hair for about 30 minutes. Rinse SOCOLOR out of your hair.
What developer do you use with Matrix SoColor extra coverage?
SOCOLOR’s Advanced formula featuring Cera-Oilâ„¢ Conditioning Complex delivers non-stop conditioning for up to 30 shampoos, shine for long-lasting color & exceptional grey coverage. Reflect Collection Metallics: 1:1 mixing ratio with 20 volume or 30 volume MATRIX Cream Developer. Timing is 35 minutes.
Can you put SoColor on wet hair?
Yes, as a matter of fact, you can dye your hair while it’s wet. There are plenty of instances, even in the salon, when wet hair application is completely normalized, but often overlooked. … Simply put, our hair color is applied on wet hair more than we may even realize.
How do you mix Matrix hair color and developer?
Take hair color cream in desired quantity and add 1:1.5 ratio of oxydant developer. That is one part of color cream in one and half portion of developer. Like one spoon(1) cream with one and half (1.5) developer. Mix them well to develop color.
What developer do you use with Matrix Socolor extra coverage?
SOCOLOR’s Advanced formula featuring Cera-Oilâ„¢ Conditioning Complex delivers non-stop conditioning for up to 30 shampoos, shine for long-lasting color & exceptional grey coverage. Reflect Collection Metallics: 1:1 mixing ratio with 20 volume or 30 volume MATRIX Cream Developer. Timing is 35 minutes.
What happens if you add too much developer to hair color?
What Happens If I Put Too Much Developer In The Dye? Your mix will be more wet, & more runny. If it is way too runny, you may end up lightening the hair, but not depositing enough color. It will end up thinner, flatter and last less long.
How do you use SoColor beauty?
Mix equal parts of the hair dye with Matrix SoColor Cream Developer (3%, 6%, 9% or 12%), i.e. 90 ml of hair dye and 90 ml of developer. Observe the proportion (1: 1). How to use: Apply the mixture on your hair. Do not use metal objects (clips).
How do you mix blended SoColor?
HOW TO
- Standard Mixing Time: 30 to 45 minutes (full 45 minutes for resistant grey hair)
- High Impact Brunettes: 1:1.5 mixing ration, 35 minutes mixing time.
- Ultra.Blonde: 1:2 mixing ration, 50 minute mixing time.
- Reflect Collection Metallics: 1:1 mixing ratio with 20 volume or 30 volume MATRIX Cream Developer.
Do you use developer with semi permanent color?
A semi-permanent color contains no ammonia and deposits only. It does not require mixing with a developer and lasts anywhere from 4 – 12 shampoos. This type of color is used to blend gray or enhance natural color and it’s safe for immediate use after a relaxer or perm service.
Can you use 20 volume developer with Matrix Color Sync?
Color Sync is an alkaline demi-permanent color predominantly mixed with 10 Volume Matrix Cream Developer and 20 Volume Matrix Cream Developer with Extra Coverage shades for up to 75% blended grey coverage. Color Sync will shift the hair’s natural pigment, yet is not designed for permanent levels of lift.
How long do you leave on Matrix SoColor extra coverage?
Just leave your color on 30 minutes and if you have stubborn gray leave it on a full 45 minutes. Also it looks like Matrix 7-10 is a demi-color. You want to use permanent color to cover gray generally.
What happens if you put hair dye on wet hair?
Wet hair — especially if it’s already dry or damaged — will absorb water before you even apply the dye, meaning it won’t absorb into hair cuticles as well. Instead, the color will be more diluted or subtle, sitting more on top of your hair.
Is it better to dye hair wet or dry?
While the back of the dye box may be telling you to dye your hair while it’s dry, many experts say that not only can you dye wet hair; it’s actually the best way to dye it. … You won’t need to use as much dye, you’ll get better and more even results, and your hair is better protected from damage.
Can I dye my hair right after washing it?
Since the dye needs to penetrate the cuticle, your hair needs to be free of any built-up product (especially wax). This can also prevent the color from distributing evenly. It’s best to color hair that has been washed 24 to 48 hours prior, because the natural oils will protect your scalp from any irritation.
How do you mix Socolor pre bonded matrices?
HOW TO
- Standard Mixing Time: 30 to 45 minutes (full 45 minutes for resistant grey hair)
- High Impact Brunettes: 1:1.5 mixing ration 35 minutes mixing time.
- Ultra.Blonde: 1:2 mixing ration 50 minute mixing time.
- Reflect Collection Metallics:1:1 mixing ratio with 20 volume or 30 volume.
- MATRIX Cream Developer.
How do you mix a matrix insider color?
COLORINSIDER is mixed in a 1:1 ratio with COLORINSIDER Oil-Cream Developer.
How long do you leave on Matrix Socolor extra coverage?
Just leave your color on 30 minutes and if you have stubborn gray leave it on a full 45 minutes. Also it looks like Matrix 7-10 is a demi-color. You want to use permanent color to cover gray generally.
What is the extra coverage 500 series used for?
Send this product to a friend
SoColor Extra Coverage provides uniform, opaque coverage that leaves the hair with a natural, traditional appearance with 100% coverage. The formula conditions and smooths even wiry grey hairs with ceramides, jojaba oil and soy bean.
What happens if you put 20 developer on hair?
Using 20 volume developer will lighten your hair even without bleach because of the lifting effect it has on the outermost layer of your hair (the cuticle layer). … So if you’re currently a level 5 light brown, using 20 volume developer alone can lighten it to a level 6 dark blonde.
How much developer do you mix with hair color?
The traditional way of mixing hair developer and hair dye is a 1:1 ratio. If you put in 100ml of hair dye, then you must put 100ml of the developer too. But if you want to lift the colors, the correct combination would be one part hair color and two parts hair developer.
How does developer affect hair color?
Developer helps the color penetrate the hair shaft and become permanent. Hydrogen peroxide developer lifts the cuticle layer of the hair and depending on the strength of the activator the cuticle will lift more or less. … Depending on the strength of the developer it can also lift the hair color level a bit.