For instance, 5/16 inches and 3/8 inches are two measurements on a ruler. In order to compare the two fractions, they must have a common denominator, 16. 3/8 is larger than 5/16.
Besides, What are ratchet sizes?
Ratchet sizes vary. Common ratchet sizes include 1/4-inch drive, 1/2-inch drive and 3/8-inch drive. Having different socket wrench sizes will allow you to operate different socket sizes based on your particular needs. Most ratchets use a geared drive.
Keeping this in mind, What is the fractional equivalent of 5 16? Answer: 5/16 as a decimal is 0.3125.
Whats bigger 1/4 or 3/8 inch?
Answer: 3/8 is bigger than 1/4
Let us find the value of the fractions in the following section. Explanation: 3/8 is expressed as 0.375 as a decimal and 1/4 is expressed as 0.25 in its decimal form. It is clear that the value of 3/8 is more than 1/4.
Whats bigger half inch or 3 8?
0.5 is greater than 0.375 which also means that 1/2 is greater than 3/8.
How do I know what size ratchet I need?
Drive sizes
- 1/4 inch – Used for smaller sockets and precision work. …
- 3/8 inch – The middle sized, and in my opinion, most useful size for general use on a car. …
- 1/2 inch – 1/2″ sockets are generally used for nuts and bolts from around 10mm and up.
Is a 72 tooth ratchet good?
The main reason why a 72-tooth ratchet will be the better call for the vast majority of applications comes down to the issue of durability.
What are the 4 socket drive sizes?
These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as “drives”, as in ” 3⁄8 drive”).
What is 5/16 as a percentage?
Now we can see that our fraction is 31.25/100, which means that 5/16 as a percentage is 31.25%.
What is 5/16 of an inch as a decimal?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch.
| Inches | |
|---|---|
| fractional | decimal |
| 3/16 | 0.1875 |
| 5/16 |
0.3125 |
| 7/16 | 0.4375 |
Is 5/16 a terminating decimal?
It consists only of twos. Hence, the decimal representation of 5/16 should terminate. The zero remainder terminates the process. Hence, 5/16 = 0.3125.
What is smaller than a 1/4 inch?
The lines at each rank get shorter, ie: 1/4 is shorter than 1/2; 1/8 is shorter than 1/4; and 1/16 is shorter than 1/8. Fractions have two parts, the numerator and the denominator. The denominator is the bottom number and it tells us what unit of fraction we are working with (ie: it denotes fourths, halves, etc.)
What fraction is bigger 1/4 or 3 4?
As you saw, if two or more fractions have the same denominator, you can compare them by looking at their numerators. As you can see below, 3/4 is larger than 1/4. The larger the numerator, the larger the fraction.
What fraction is bigger 3 4 or 3 8?
This is the smallest number that can be divided by both 4 and 8. In this case, the lowest common denominator is 8. … Now that these fractions have been converted to have the same denominator, we can clearly see by looking at the numerators that 6 is greater than 3 which also means that 3/4 is greater than 3/8.
Which is bigger 5/8 of an inch or 3/4 of an inch?
0.75 is greater than 0.625 which also means that 3/4 is greater than 5/8.
What is 3 over 8 as a decimal?
Answer: 3/8 as a decimal is 0.375.
What are the 3 common ratchet drive sizes?
Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.
Do I need a 1/2 Ratchet?
1/2 ratchets are great for doing suspension and exhaust work but honestly not needed. You can get by with a 1/2 breaker bar and a good assortment of 3/8 sockets.
How many teeth are good for a ratchet?
Fine, or high-tooth-count, ratchets range from about 72 teeth to 160 teeth. Now, tool manufacturers can create these high-tooth-count ratchets a few different ways. You can obviously machine more teeth onto the drive gear or you can add more pawls.
How many teeth do you want in a ratchet?
The trade-off is these types of ratchets generally have lower maximum torque output. Therefore, if high torque is the primary need choose a ratchet with fewer teeth. If fine-tuning and confined space work is the priority, choose a model with 72 or more teeth.
What is the highest tooth ratchet?
Steelman Pro’s Cobra Series 160 Tooth Ratchet features the highest tooth count on the market. Its 160 tooth count means this ratchet requires only a 2.25-degree arc swing (compared with the 5-degrees needed by most other fine teeth ratchets), giving plenty of room when working in tight and cramped spaces.
What size socket drivers are there?
There are 5 different sizes of ‘drive socket’ that are commonly used: 1/4″, 3/8″, 1/2″, 3/4″ and 1″. The smaller the drive is, the smaller the head is likely to be as well.
What are socket set sizes?
Socket set sizes
- The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.
- The size of the socket head (the part that fits over or into a fastener).
Why are there different socket drive sizes?
Drive size: Both metric and SAE sockets are available in three drive sizes: ¼-inch, 3/8-inch and ½-inch. … Large, ½-inch drive sockets can handle more torque and are ideal for larger fasteners that require a longer ratchet or breaker bar to loosen or fully tighten.