NetLink ONU Configuration at 192.168.
1.1 for FTTH Voice & Internet
- Login to Netlink ONU in any browser with url 192.168.1.1.
- Enter username and password. …
- Go to Management > Device Management > Restore default > Restore Factory default.
- Click Network > Internet > Delete.
- Check Status > Wan Connection info >
Also How do I reset my broadband connection?
First, unplug your router and broadband modem from power (for some devices you’ll have to remove the battery as well). Then wait about 30 seconds, and plug them back in: first the modem, then the router. Wait a few minutes for them to completely power back on.
Subsequently, How do I configure my router?
Router setup steps
- Step 1: Decide where to place the router. …
- Step 2: Connect to the Internet. …
- Step 3: Configure the wireless router gateway. …
- Step 4: Connect gateway to router. …
- Step 5: Use app or web dashboard. …
- Step 6: Create a username and password. …
- Step 7: Update the router’s firmware. …
- Step 8: Create a Wi-Fi password.
How do I configure my modem?
Power on your router and computer first and then modem.
- Log into the router’s web-based management page. …
- Configure WAN Connection Type. …
- Enter your PPPoE username and password which are provided by your ISP.
- Click Save to save your settings, then the router will connect to Internet after a while.
How can I activate BSNL broadband WiFi?
Steps to connect to BSNL Free Wifi Hotspot
- Go to WiFi settings.
- Search and connect to BSNL WiFi.
- Tap on ‘connect’
- Enter the 10-digit mobile number.
- Tap on Get Pin option after which you will receive a 6-digit pin via SMS.
- After entering that PIN, users will be connected to BSNL WiFi.
How do I fix my broadband connection?
Disconnect power to all broadband devices (such as the broadband modem, wireless router, or router/modem combination), and wait for the LED activity lights to turn off. Wait at least one minute. Reconnect the power to the modem and allow it to re-establish a connection to the ISP.
What does the reset button do on a router?
A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.
How do I reset my modem and router?
Step 1: Unplug the modem and router from the power outlet. Step 2: Wait at least 15 seconds. Step 3: Plug the modem back into the power outlet first, wait 1-2 minutes, then it’s time to power on the router. Step 4: Wait for all panel lights on your cable modem to become green on before testing your internet connection.
What does it mean to configure a router?
Router configuration: Specifies the correct IP addresses and route settings, etc. Host configuration: Sets up a network connection on a host computer/laptop by logging the default network settings, such as IP addressing, proxy, network name and ID/password, to enable network connection and communication.
How do you access your router settings?
Find Your Router’s IP Address
You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.
How do I get to my router admin page?
Do this by typing the router’s IP address (in the format http://192.168.1.1) in the browser’s address bar. Enter the administrative login information—username and password—to authenticate and access the admin settings.
What is modem configuration?
Modem configuration functions enable you to configure a modem before making a connection. An application can set modem options and determine the features of a modem without using commands specific to any modem device.
How do I access my routers modem settings?
Find Your Router’s IP Address
You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.
How do I log into my 192.168 1.1 IP address?
How to Login 192.168.
1.1?
- Turn on your router and connect it to your computer with an Ethernet cable. …
- Open your favorite web browser and type “http://192.168.1.1” into the address bar. …
- Enter the correct router login/password combination.
How can I fix BSNL WiFi?
Also check if the data lights on your home router is blinking or not. Step 3: If the Data light is blinking – but you are still not able to connect to the internet, that means some of the network setting has been refreshed and you need to reconfigure the BSNL ONT. Step 5: Disconnect and restart your home router.
How do I setup a broadband connection?
How to configure your router in 5 simple steps
- Connect your router. The broadband Wi-Fi router is the bridge between the Internet and your home network. …
- Access the router’s interface and build it. …
- Configure security and IP addressing. …
- Set up sharing and control. …
- Set up user accounts.
What causes broadband to stop working?
The most common causes are either faulty or poor wiring in the home, including microfilters; or, slightly more problematically, poor wiring between the home and the local exchange. Dropping can also be due to overcapacity, although it’s unlikely to cause a frequently recurring dropped connection.
Why is my broadband disconnected?
Your modem isn’t connecting with your internet provider
Your internet may randomly disconnect because you have a modem that doesn’t communicate with your internet service provider (ISP) properly. … Sometimes issues arise that are out of your control—like problems in the neighborhood—that cause your modem to disconnect.
Why is my Internet connection not working?
Restart your wireless router.
Often you can: Unplug the router from the electrical outlet and make sure the lights on the router go out. Wait 30 seconds. Plug the router back in and wait 30 seconds for all the lights to come back on.
Should I press reset button on router?
We suggest only pressing the Reset button if you wish to clear your device of all configurations (intentionally) or if you cannot recover your network password (in the case of routers) and have attempted all other methods of troubleshooting. …
Why do I need to reset my router?
This is sometimes called a “power-cycle.” Rebooting your router cleans out the device’s short-term memory (also called “cache”) to keep it running more smoothly. It also allows the router to re-select the least crowded channel for each frequency, which means a stronger connection to your devices.
Does Resetting router make Internet faster?
A wireless router reboot isn’t a guarantee of better bandwidth, but it can give you some fast speeds for a while. … A reboot helps it cool down and start over again. If you’re seeing crappy download speeds across multiple devices, chances are it’s the router.
Will resetting my router mess up my Internet?
It’s important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. … The most universal way to reset a router, however, is via the reset button, usually found on the router’s back or underside.
Why is my modem not connecting to the Internet?
There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.
Why do modems need to be reset?
Rebooting your modem can fix Internet connection problems, improve slow moving connections and resolve wireless issues, which also affect your Digital TV service that is being transmitted over an internet connection. … This will not cause any harm to your electronics as it is simply a way of rebooting the system.