Concrete material made of lightweight aggregates is called lightweight aggregate concrete, while material made from a cellular matrix is generally called foamed concrete because of the pores introduced by a foaming agent.

Until the mid-1990s, foam concrete was regarded as weak and non-durable with high shrinkage characteristics. This is due to the unstable foam bubbles resulted in foam concrete having properties unsuitable for producing very low density (Less than 300 kg/m3 dry density) as well as load bearing structural applications.

Subsequently, What is lightweight foam concrete?

Foam concrete, also known as Lightweight Cellular Concrete (LCC), Low Density Cellular Concrete (LDCC), and other terms is defined as a cement-based slurry, with a minimum of 20% (per volume) foam entrained into the plastic mortar. … The density of foam concrete usually varies from 400 kg/m3 to 1600 kg/m3.

Also, Why is foam used in concrete?

Recently, foamed concrete is being widely used in civil construction and building, because of its high fluidity and settlement, low self-weight and low thermal conductivity.

What is lightweight concrete used for?

Lightweight aggregate concretes can be used for structural applications, with strengths equivalent to normal weight concrete. The benefits of using lightweight aggregate concrete include: Reduction in dead loads making savings in foundations and reinforcement. Improved thermal properties.

Last Review : 7 days ago.


Does Aircrete absorb water?

Aircrete absorbs water over time hence the need to add cover using materials like plaster. … It absorbs water, which means an outside cover is required, like plaster. When exposed to water continuously over some time, the strength of aircrete may reduce.

Where is lightweight concrete used?

Practical Applications of Lightweight Concrete As such, it can be used to successfully build bridges, decks, girders, piers, precast constructions, and high rise buildings with reduced density.

Is Aircrete as strong as concrete?

Aircrete is a material that combines strength, durability, and lightweight properties that make it easy to work with when building. It’s relatively inexpensive when compared to concrete and has a less environmental impact. Aircrete is not as strong as concrete. It is 50% the strength of regular concrete.

What is meant by lightweight concrete?

Lightweight concrete is a mixture made with lightweight coarse aggregates such as shale, clay, or slate, which give it its characteristic low density. Structural lightweight concrete has an in-place density of 90 to 115 lb/ft³, whereas the density of regular weight concrete ranges from 140 to 150 lb/ft³.

How do you make lightweight foam concrete?

A standard recipe is 2 parts of cement and fine, dry sand to 1 part water and foam generator. You will want to have a quality foam generator to get the best results.

How do you make lightweight concrete with Styrofoam?

– Place 5 gallons of water into the concrete mixer. …
– Add half a 94 lb. …
– Add one of the 5 gallon buckets of Styrofoam beads. …
– Continue adding the Styrofoam, taking the time to mix in each bucket after the addition to the cement mixture. …
– Stop mixing the concrete when all the Styrofoam has been absorbed.

What are lightweight concrete blocks used for?

The lightweight concrete blocks can help reduce heavy lifting and carrying by minimizing the weight of the concrete blocks that must be lifted and carried during brick-laying tasks.

How long does Aircrete take to dry?

24 hours

What is lightweight concrete called?

Foam concrete, also known as Lightweight Cellular Concrete (LCC), Low Density Cellular Concrete (LDCC), and other terms is defined as a cement-based slurry, with a minimum of 20% (per volume) foam entrained into the plastic mortar.

Which of the following is light weight concrete?

Explanation: The light-weight concrete is prepared by using coke-breeze, cinder or slag as aggregate in the concrete. Lightweight aggregates used in structural lightweight concrete are typically expanded shale, clay or slate materials that have been fired in a rotary kiln to develop a porous structure.

Does Styrofoam stick to concrete?

Concrete does not stick well to styrofoam. Making it wetter and weaker will not help in the long run. … After installing Styrofoam, you must use some cement or mortar to cover it up and harden the surface.

What is concrete foaming agent?

Foaming agents reduce concrete density to make lightweight concrete or low strength (flowable fill) concrete allowing for: Increased yield. Optimum workability and pumpability. Little or no bleeding. Controlled segregation.

What is lightweight structural concrete?

overview. Structural lightweight concrete made with rotary kiln produced structural lightweight aggregate solves weight and durability problems in buildings and exposed structures. Structural lightweight concrete has strengths comparable to normal weight concrete, yet is typically 25% to 35% lighter.

Can Aircrete be used for foundation?

Aircrete can be used for foundations. It is light, hardens overnight, and continues to harden over time. It is easy to mold and shape using normal wood-shaping tools. Aircrete mostly consists of cement, water, and foam, although other materials like sand, lime, gypsum, and aluminum are also used.

Can you make a driveway out of Aircrete?

You can use aircrete for walls, driveways, floors, and sub-level. The high performance of this material makes it a long-term, cost-effective solution for any areas where you would have used concrete previously.

[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.