There is much misconception around installing a wood burning stove and whether you need planning permission or not. Historically you may need some kind of clearance from your local authority, but with new updated changed, vast majority of cases need no formal permission.

Thereof Do you need consent for fireplace NZ? You must have a building consent before you install, move or substantially change a fireplace or solid fuel heater to make sure that it’s installed properly and is safe to use.

Can I complain about my Neighbours wood burning stove? Local Councils are legally obliged to investigate complaints made under the Environmental Protection Act 1990 relating to public health and nuisance issues, which include smoke and fumes from fires or stoves.

Similarly, Do you need planning permission for a log burner flue?

Planning permission is not generally required providing that the log burner’s flue does not extend more than one metre above the highest part of your home’s roof.

What is the law on wood burners?

Wood burning stoves and open fires aren’t being banned, but the Government has made it illegal to sell the harmful fuels people burn in them. From now on, bagged coal and wet wood of less than two cubic metres can’t be sold.

What qualification do you need to fit a log burner? Although there is no legal requirement to hold a specific qualification, and effectively anyone can buy and fit a wood burning stove, tradesmen should proceed with caution in their installation, argues David Wright, Residential Sales & Marketing Manager of Schiedel Chimney Systems.

Can I have a fireplace in my house?

Be assured that it is possible to add a fireplace to an existing home. You’ll just need to determine which one will work best. … Fireplaces generally fall into one of three categories: gas, masonry, and zero-clearance (also known as prefabricated or manufactured fireplaces).

What clearance is required around a wood burning stove NZ? The rear and side heat shields of the fire should have a clearance of at least 250mm from any combustible material.

How do you get neighbors wood smoke out of your house?

People who are potentially most vulnerable to harm from wood smoke include infants, children, the elderly and people with heart or lung disease, including asthma.

  1. Stop Burning. …
  2. Don’t Exercise in Smoky Air. …
  3. Have Respirators on Hand. …
  4. Place HEPA Filters in Key Rooms. …
  5. Upgrade HVAC. …
  6. Report Problems to PSCAA.

Can you have a log burner in a smokeless zone? Wood is not specifically listed as a smokeless fuel, so many people assume they can’t burn it in smokeless zones. However, by using a DEFRA-certified stove (also known as an exempt appliance), good quality, dry wood can be used safely.

Do log burners damage the environment? “This study confirms that indoor wood burners contribute significantly to indoor air pollution,” he said. “It also suggests that even government-certified solid fuel stoves impair local outdoor air quality. It is therefore difficult to justify their use in any urban area.”

Is listed building consent required for a wood burning stove? Otherwise there is a requirement for Listed Building Consent. … Yes – installing a free-standing wood burning or multi-fuel stove in an existing open hearth that employs a flexible flue system (i.e. not affixed to the inner faces of the chimney) can be installed without the need for listed building consent.

Can anyone have a log burner?

It is possible to have a wood burner installed in your home without a chimney. To achieve this, the wood burner must have a twin skin insulated flue system installed. … They will offer expert advice on many elements, including building regulations, required flue systems, insulation and wood stove heat shields.

Is burning wood going to be banned?

The EPA has recently banned the production and sale of 80 percent of America’s current wood-burning stoves, the oldest heating method known to mankind and mainstay of rural homes and many of our nation’s poorest residents.

Can I burn wood in my log burner? Can I keep using my existing stove? Yes – The Clean Air Strategy does not say there will be a ban on the use of existing wood or multi-fuel appliances, nor do you need to modify your appliance. Recommendations however are that you should burn only quality dry “Ready to Burn” wood or quality smokeless fuels.

Can a plumber install a log burner? If there is a fireplace and an existing flue, then you’ll need to check that the flue is big enough and well-constructed enough to allow the stove to work correctly. It is essential that the existing gas fire is removed safely, you will need a Gas Safe registered plumber to carry out this work.

Can I install a log burner myself?

Installing a wood burner or multi-fuel stove is not something you should do yourself. An ill-fitted stove could result in it becoming a fire risk, but there’s also the potential for it to release lethal carbon monoxide into your home and create more pollution.

What is the law on burning wood? Since 1 May 2021, the Air Quality Solid Fuel regulations have come into force restricting the sale of wet wood and bituminous coal. … You should not burn old pallets, furniture or scrap wood as it may contain contaminants that can be harmful to your health and the environment.

Can I burn wood in my fireplace?

You could destroy the fireplace.

When you burn wood inside a fireplace, the temperatures are way higher than burning propane or natural gas. These gas fireplaces aren’t designed to withstand so much heat, and their internal parts and components are at risk of being destroyed.

Can you have a wood burning fireplace without a chimney? Yes, it is possible to add a wood burning stove or a fireplace without an existing chimney, but you do need to install a chimney in the process. All wood burning fireplaces have to have a way to allow smoke and dangerous gases to exit your home. … But you also don’t have to build a large brick or rock fireplace.

Can you put a woodburner in any house?

Yes – a Wood Burning stove can be fitted if you don’t have a chimney in your house. To achieve this you would need a factory made twin skin insulated flue system to be installed.

Can you fit log burner yourself? Installing a wood burner or multi-fuel stove is not something you should do yourself. An ill-fitted stove could result in it becoming a fire risk, but there’s also the potential for it to release lethal carbon monoxide into your home and create more pollution.

Is it OK to burn treated wood in a log burner?

Paint/treated wood

Any material which has been painted or treated by any chemicals is likely to release an array of toxic chemicals when burned. These chemicals can be highly dangerous to you and your family as well as releasing potentially toxic fumes into the atmosphere.

Don’t forget to share this post !