10 Cheap & Easy Ways To Cover Walls

  1. Foam board.
  2. Large art prints.
  3. Starched fabric wall covering.
  4. Loose fabric wall covering/curtain.
  5. Tapestry wall hanging.
  6. Vinyl wall decals.
  7. Peel and stick wallpaper.
  8. Mirrors.

Besides, What is the cheapest interior wall material?

What Is The Cheapest Interior Wall Material? Drywall is a pretty cheap option as far as interior wall materials go. A sheet of drywall can cost anywhere from $9 to $15, depending on the size and the installation per sq.

Keeping this in mind, How do you cover an unsightly wall?
10 wonderful ways to hide ugly walls

  1. Put in a bookshelf. Save. Neuvonfrisch – Möbel und Accessoires Request quote. …
  2. Install a mosaic pattern. Save. Brixels Request quote. …
  3. Make them functional. Save. …
  4. Hang a curtain. Save. …
  5. Get a wall tattoo. Save. …
  6. Put up a snazzy lamp. Save. …
  7. Make a fake window. Save. …
  8. Put up a map mural. Save.

What can be used to cover a wall?


10 Wall Covering Ideas For Bad Walls

  • Wall Panels Perth. …
  • Wall coverings for bathrooms. …
  • Picture collage. …
  • Tapestry. …
  • Drywall Mud. …
  • Curtains. …
  • Mirrors. …
  • Fabric wall coverings Perth.

What can I cover a wall with?


14 Alternative Ways to Decorate Walls Without Paint

  • Temporary Wallpaper. Temporary wallpaper is a thing, and is especially becoming a popular design trend in the USA. …
  • DIY wall design using Masking Tape. …
  • Hanging Art/Photos. …
  • Wall Decals. …
  • Tile Transfers. …
  • Stretched Fabric & Tapestries. …
  • Shelves. …
  • Bamboo blinds.

What is the cheapest alternative to drywall?

Plywood is the cheapest alternative to drywall on this list and allows you to finish a room with a certain flair without taking on the expenses of wood planks, veneer or drywall.

What is the cheapest wall sheeting?

OSB is a conventional sheathing material used for subfloors, roof and wall sheathing. OSB is traditionally cheaper than plywood and other structural sheathings; however, a high demand over supply of OSB in recent years has caused OSB prices to escalate.

What is the cheapest wall to build?

The cheapest types of retaining walls are wood and concrete blocks, followed by concrete and stones or bricks. Each material has benefits and drawbacks, including strength, longevity, and attractiveness. For those who are planning on building their own retaining wall, it is vital to plan and research.

What can I use to cover bad walls?


Cheap Wall Covering Ideas for Bad Walls – 26 Ways To Fix Old…

  • Wallpaper. Peel and stick wallpaper are probably one of the easiest ways to cover up some ugly walls. …
  • Wood Slat Wall. …
  • Fabric Wall. …
  • Diamond Accent Wall. …
  • Inspiration Board Wall. …
  • Burlap Wall. …
  • Photo Collage Wall. …
  • Laser Cut Panels.

How do you make an old garden wall look good?


Garden wall ideas: 21 stunning looks for the boundaries of your…

  1. Grow a row of espaliered trees. …
  2. Elevate the mood with an eye-catching hue. …
  3. Add a whimsical window. …
  4. Soothe the scene with a water wall. …
  5. Add extra greenery with an outdoor wreath. …
  6. Dazzle with tiles on your garden wall. …
  7. Make it a fun feature.

What is a cheap alternative to drywall?

Plywood is the cheapest alternative to drywall on this list and allows you to finish a room with a certain flair without taking on the expenses of wood planks, veneer or drywall.

How can I cover my walls without plastering?


How to Smooth Walls Without Plastering (5 Methods to Follow)

  1. Fill Holes or Cracks. Before you do anything, fill any holes and cracks in your wall. …
  2. Sanding. If your old plaster is a bit lumpy and bumpy, sand it to smooth out any bumps. …
  3. Clean the Wall of Scuffs & Marks. …
  4. Hang Wallpaper. …
  5. Paint Your Walls.

Are there alternatives to drywall?

Instead of using a more complicated or expensive alternative, such as decorative fiber cement boards, fiberglass panels or magnesium oxide (MgO) board, consider insulating your drywall with engineered EPS foam panels, such as InSoFast UX 2.0, particularly in a moisture-prone basement.

What’s cheaper drywall or paneling?

Because prefinished wall paneling varies so much in price, it is hard to determine the actual cost difference. But in general, paneling is more expensive. While paneling varies from $30 to $90 per panel, drywall sheets are about $10 to $30 per sheet. There are some complications with these costs though.

Is shiplap cheaper than drywall?

Shiplap is usually more expensive than drywall. Decent quality shiplap will cost $16-$25 while drywall of equal quality will retail for $12-$15. Since the materials used in drywall are cheaper to produce than those found in shiplap, the overall cost of drywall can be much lower.

Is OSB cheaper than plywood?

OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.

What is a good substitute for OSB?

Most builders are so comfortable with OSB wall sheathing that they never consider using an alternative material. In fact, a wide range of materials can be used to sheathe a wood-framed wall. In addition to OSB, builders can choose plywood, fiberboard, rigid foam, diagonal boards, and fiberglass-faced gypsum panels.

What kind of plywood do you use for walls?

Structural Fiberboard

Plywood and OSB are largely considered the best wall sheathing choices because of their overall abilities to hold fasteners well, create a strong bond between studs, and provide some thermal advantages.

What is the cheapest structure to build?

Tiny house

Generally defined as houses with square footage between 100 and 400 square feet, tiny houses are typically the cheapest kinds of houses to build.

What is the cheapest building material right now?


These 8 reasonably priced materials look good and are easy on your wallet.

  • Build for Less. 1/9. …
  • Concrete Sheets. 2/9. …
  • Reclaimed Wood. 3/9. …
  • Used Brick. 4/9. …
  • Corrugated Metal. 5/9. …
  • Stone Veneer. 6/9. …
  • Shipping Containers. 7/9. …
  • Bamboo. 8/9.

Which is cheaper drywall or plywood?

Drywall is cheaper than plywood – Most wood materials are expensive. … While it is not as expensive as regular wood, it is slightly more expensive than drywall. Fixing drywall is also a lot cheaper and less time consuming than plywood.

How can I make my brick wall look better?


7 Ways to Update Your Interior Exposed Brick Wall

  1. Create Some Contrast In Textures. source. …
  2. Limewash It. source. …
  3. Add Windows. source. …
  4. Frame It. source. …
  5. Paint It Black. source. …
  6. Add a Mural. source. …
  7. Add a Pop of Color. source.

How do I brighten a garden brick wall?

How do I brighten a garden brick wall? Color is the best way to brighten a brick wall, be that paint, flowers or foliage. Varying color and texture will bring an exposed brick wall up-to-date. Remember, lighter colors tend to dominate, so keep to dark tones on the bottom for a grounding effect.

How do you make an exterior concrete wall look good?


You can add pattern and texture, incorporate landscaping plants or custom artwork, and more.

  1. Get Creative With Poured Concrete. …
  2. Add Plants and Metalwork. …
  3. Mimic the Texture of Rough-Sawn Wood. …
  4. Hang Vertical Planters. …
  5. Customize with a Mural. …
  6. Apply a Textured Overlay. …
  7. Embed Boulders.