Power up the laptop. When the initial TOSHIBA screen displays, press the F12 key to enter the boot menu. Use the arrow keys to select the HDD Recovery option and press the enter key to begin.

Also How can I enter BIOS if F2 key is not working?

BIOS Setup doesn’t open when you press the F2 key during boot.

…

  1. Go to Advanced > Boot > Boot Configuration.
  2. In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
  3. Press F10 to save and exit BIOS.

Subsequently, What is the boot key for Toshiba? When the TOSHIBA splash screen is displayed when you first turn on your computer, a boot menu prompt may be displayed for a few seconds near the bottom of the screen, indicating that a key (F2 or F12, for example) can be pressed to display a menu of boot options.

How do I force a factory reset on a Toshiba laptop? Press and hold the power button for at least 10 seconds until the laptop powers off. Simultaneously press and hold the power button and 0 (zero) key to boot up the laptop. Release the 0 key when the laptop starts beeping. Select Yes to opt for System Recovery, then select Recovery of Factory Default Software > Next.

Where is the reset button on a Toshiba laptop?


Hard Reset:

  1. Unplug the computer from the AC adapter.
  2. Insert a slender object such as a straightened small paper clip into the reset hole on the left side of the display to press the internal reset button.
  3. Remove the object you used to reset the computer.
  4. Re-Connect the AC adapter.

What to do if F2 is not working?


2] Check Startup programs

  1. Right-click on the Taskbar, and select Task Manager.
  2. Switch to Startup Tab, and disable all the third-party programs.
  3. Restart the computer and check if F2 works, if yes then follow the next step.
  4. Launch the programs which you disabled on by one, and check if the issue comes back.

How do I get into BIOS if keyboard is not working?

Once in the BIOS, you want to be looking for and option in there that says ‘USB legacy devices’, make sure it is enabled. Save the settings in the BIOS, and exit. After that, any USB port the key board is connected to should allow you to use the keys, to access the BIOS or Windows menus when booting if pressed.

How do I boot my Toshiba?

Press the “ESC” key on the upper left corner of the keyboard immediately after turning on the power, hold it for three seconds then release it. Press the “F1” key when prompted on the boot screen to enter the Toshiba laptop BIOS setup program.

What is the F12 boot menu?

The F12 Boot Menu allows you to choose which device that you would like to boot the computer’s Operating System from by pressing the F12 key during the computer’s Power On Self Test, or POST process. Some notebook and netbook models have the F12 Boot Menu disabled by default.

What is the BIOS key for Toshiba Satellite?

If there is a single BIOS key on a Toshiba Satellite, it is the F2 key in most cases. To access BIOS on your machine, press the F2 key repeatedly as soon as you switch on your laptop. Most of the time, a prompt tells you to press F2 to enter setup, but this prompt may be missing depending on your specific system.

How do I force my laptop to factory reset?

To begin, in the Start menu, click Settings, and then click Update & Security. In the resulting Update & Security window, click Recovery in the left pane. Under Reset this PC in the right pane click Get Started. In the following screen, choose either Keep my Files, Remove Everything, or Restore Factory Settings.

How do you reset a Toshiba laptop that won’t turn on?


Hard Power Cycle (For computers that have removable batteries):

  1. Unplug the computer from the AC adapter.
  2. Remove the battery from the computer.
  3. Press and hold the power button for 20 seconds.
  4. Re-Install the battery.
  5. Re-Connect the AC adapter.
  6. Press the power button to turn the computer back on.

How do I restart my Toshiba laptop when the screen is black?


Option 1: Try Shift + F8 + Power button

  1. Turn off your Toshiba laptop.
  2. Unplug the power cable, and remove your battery (if it’s removable).
  3. Put your battery back and re-plug your power cable.
  4. Simultaneously press the Shift key, F8 key and Power button on your keyboard.
  5. Wait for your laptop to start.

How do you restart a frozen Toshiba laptop?

Press and hold the computer’s power button for ten seconds. For relatively new Toshiba notebook computers, this will turn the computer off. Watch for the ‘On’ light to go off, wait for five seconds, and then turn the computer on — by pressing and holding the power button, for roughly one second.

Why does my F2 key not work?

Under the “Keyboard” tab, check or uncheck the “Use all F1, F2, etc. keys as standard function keys” according to your preferences. … This can be toggled on some computers and keyboards by pressing Fn-F6. Various system settings can also affect keyboard function.

How do I get my F2 key to work?

Once you find it, press the Fn Key + Function Lock key simultaneously to enable or disable the standard F1, F2, … F12 keys. Voila! You can now use the functions keys without pressing the Fn key.

Why is F2 not working in Excel?

If F2 also not work please check if you have FN (function) key in Excel, you need to press the function key, while click the F4 key (or other function key) at the top of the keyboard. After trying this method if your issues still exists, you can try to repair your Office in Windows 10.

How do I change my BIOS settings without a keyboard?

Configure and optimize you computer for Audio. Usually during booting you’d press [Del] and you enter the BIOS screens to change whatever you’d like.

How do I get to the boot menu without a keyboard?


I – Force Windows to start in advanced boot options

  1. Start the Windows and as soon as you see Windows logo; press and hold the power button to force shutdown it.
  2. You can also pull out the power supply (or battery) to force shutdown it.
  3. Repeat this 2-4 times and Windows will open up boot options for you.

How can I boot without keyboard?

yes the computer will boot without the mouse and monitor. You may have to enter BIOS to change settings so it will continue to boot with no keyboard. You will have to plug in the monitor to see what is going on. Once you have it booting without the mouse and keyboard, then unhook the monitor.

How do I reboot and select proper boot device Toshiba?


Fixing “Reboot and select proper Boot Device” on Windows

  1. Restart your computer.
  2. Press the necessary key to open BIOS menu. This key depends on your computer manufacturer and computer model. …
  3. Go to the Boot tab.
  4. Change the boot order and list your computer’s HDD first. …
  5. Save the settings.
  6. Restart your computer.

How do I reboot my Toshiba laptop without a bootable device?

– First, do a hard reboot, remove the battery and unplug the AC adapter then press and hold the power button for 20 seconds then try booting it up again. – If it will give you the same error and if you’re also using a Toshiba laptop, press and hold the F2 button then turn the laptop on and it should load into BIOS.

How do I use the F12 boot menu?

While booting (before Windows starts loading), continuously press F12 to enter your PC’s BIOS. Then select USB Drive as the boot device and Press Enter key. Note: The keys to press, such as F12, F2, Delete, or Esc, differ on computers from different manufacturers.

What does the F12 do?

The F12 Key – Save As

F12, the final function key, is used mostly in Microsoft Office. If you want to save your document, workbook, or slideshow with a different name or to a different location, tap F12 to bring up the Save As dialog. Ctrl+F12 will start the Open File dialog.

What does F12 do on a laptop?

The F12 key is a function key found at the top of almost all computer keyboards. The key is most often used to open Firebug, Chrome Developer Tools, or other browsers debug tool.

General, knowledge