if you want to read disk on your ps3, you have to clean the disk, you get your get your game then turn it around, you have to put your breath on like you were cold, then you have to clean it with a soft clothing then try it, hope it WORKS.
– Insert a disk into the PlayStation 3 Blu-ray Drive.
– Clean the Disk – Using a cleaning solution and a microfiber cloth, clean the disc.
– Eject the disk.
– Re-insert the disk into the PlayStation 3.
– Clean the Lens.
– Eject the disk.
– Re-insert the disk into the PlayStation 3.
Subsequently, Why isn’t my PlayStation reading my disc?
PS4 disc troubleshooting Clean the disc with a soft clean cloth to remove any dirt or prints. Try inserting another game, Blu-Ray disc, or DVD. The PS4â„¢ console does not play burned discs or audio CDs.
Also, Why is my PS3 disc not spinning?
This may be caused by either a motor failure or by a foreign object blocking the motor. If the issue is with the laser, the disc may load but the laser does not detect a disc and then does not spin the motor. This may be caused by an excessively dirty laser lens or a laser that has otherwise burned out.
How do you fix a DVD player that won’t spin?
Spray three short bursts of WD-40 (or similar lubricant) under the plastic disc that grabs the DVD and pulls it into the motor and drive shaft (it will be a quarter-sized black or gray disc that is attached to the spindle motor). Let settle for a few seconds.
Last Review : 15 days ago.
Why is my PS3 not displaying anything?
Try an alternate cable – Try Connect PS3 With AV Cable instead of the HDMI to see if you can get a successful installation. … Try resetting the TV by turning the TV and PS3 off, then unplug the TV power cord from the outlet and plug it back in. Then turn your TV and PS3 back on and see if the picture appears.
What do you do when your PS3 wont load games?
– Check both sides of your disc to make sure that it is not scratched or damaged, and then clean your disc carefully using a microfibre cloth.
– Once that is done, reinsert your disc into the console and attempt to launch it again.
Why is my PS3 not reading discs?
Clean Your Disc It may seem obvious, but one of the most common reasons for a console’s inability to read a disc is disc damage. Check both sides of your disc to make sure that it is not scratched or damaged, and then clean your disc carefully using a microfibre cloth.
Why is my DVD player not reading the disc?
Make sure that the disc has been inserted properly into the player. Make sure that the DVD player is connected properly to the TV . Check that the TV where the DVD player is connected to is set to the right input. … Make sure the DVD region code and format of the discs are compatible with the player.
How do you troubleshoot a DVD player?
– Fix 1. Check if the optical disc drive is dirty or broken. …
– Fix 2. Check if the DVD disc is damaged. …
– Fix 3. Check if the cables are connected correctly. …
– Fix 4. Check if the DVD is region-coded. …
– Fix 5. Check if the TV settings are correct.
How do I get my HDMI cable to work on my PS3?
– Go to [Settings] in the XMBâ„¢ home menu.
– Go to [Display Settings], then press the [X] button.
– Highlight [Video Output Settings], then press the [X] button.
– Select [HDMI] as the connector type on your display, then press the [X] button.
Why is my PS3 showing a black screen?
In order to fix it, it’s pretty simple. First make sure the PS3 is in stand-by mode (the switch on the back is on, but the system is off). Then press the power button on the front of the console and hold it down until it beeps twice. That’ll reset the resolution to 480i and it should display on your TV.
How do you fix a DVD player that freezes and skips?
– Take some DVD cleaner and spritz it on the back of your DVD. …
– Check the disc under a lamp and make sure there are no fingerprints, dust, dirt, or smudges left on the disc. …
– Turn your DVD player on and insert a DVD player cleaning disc from a kit. …
– Play the disc and allow it to clean the laser lens inside the DVD player.
What do you do if your PS3 doesn’t show up on the TV?
It sounds to me like you need to reset your PS3 video settings. While turning on your PS3, hold the power button down for about 5 seconds until you hear two beeps. This should reset your video settings to basic and allow you to configure the output (composite/component/HDMI) choice.
Why is my Playstation on but no picture?
Turn off your TV and unplug your HDMI cord. Plug the (“high speed!”) HDMI cable from your PS4 into the 4K 60hz port on your TV. … Your PS4 will restart and you’ll likely end up with a blank screen. Turn your PS4 off (hold the button) and repeat the previous setp to go back into Safe Mode.
How do I fix my PS3 Black HDMI?
– Before changing cables, make sure the PS3 is turned off and the power light is red.
– Unplug the power cord of the PS3 and television (or display) from the wall socket.
– Make sure the HDMI cable is connected to the [HDMI OUT] port on the back of the PS3 system.
How do I reset my PS3 display?
Reset The Default Display Settings on a PS3 Turn off the PS3. Press and hold the I/0 button until it beeps twice. This will reset the PS3 to default screen settings.
How do you fix a disc that won’t read?
– Rubbing Alcohol Method: Get a lint free non scratching cloth. …
– Toothpaste Method: Use a small dab of the gritty type of toothpaste. …
– Banana Method: Use a banana that is peeled and cut in half. …
– Skip Scratch Fixer Method: …
– Petroleum Jelly Method:
Why does my PS3 screen go black when I play a game?
In order to fix it, it’s pretty simple. First make sure the PS3 is in stand-by mode (the switch on the back is on, but the system is off). Then press the power button on the front of the console and hold it down until it beeps twice. That’ll reset the resolution to 480i and it should display on your TV.
Will any HDMI cable work for PS3?
Any HDMI cable would work just fine. … basically any HDMI cable will make your PS3 look amazing, even without gold tips.
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.