Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
Before you go shopping for new knobs, first determine the brand of your bathroom fixtures. If you cannot determine the brand, there are universal knobs that you can buy. Shower knobs come in a wide variety of styles and colors, so it is also important to keep in mind the look you want to achieve in your bathroom.
Subsequently, How do I find out what brand my faucet is?
The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. The logo might be large and obvious, or it might be small and unobtrusive. If you can’t see an obvious one, try cleaning it first. If it is slightly dirty, the logo might be hidden.
Also, How do I know what kind of faucet I have?
– Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. …
– Find a model number. …
– Count the splines on the broach and measure the stem. …
– Distinguishing features. …
– Use a broach gauge.
How can I tell what brand my bathroom faucet is?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
Last Review : 8 days ago.
How do I identify my shower faucet model?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.” In the image above, the model number is 6227-V3-AA.
How can I tell who made my faucet?
Identifying Your Faucet Model The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”Nov 2, 2019
How do I know what size faucet I have?
If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.
What brand of bathroom faucet do I have?
If you can’t find an identifying model number or manufacturer’s name on the faucet itself, you can identify the manufacturer if you remove the handle and the faucet stem and count the number of splines on its broach and measure the length of the stem. Chicago faucets for example, use a square broach without teeth.
How do I find my shower stem?
Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.
How much does it cost to have a plumber replace a shower faucet?
The national average materials cost to install a shower faucet is $249.08 per faucet, with a range between $147.27 to $350.88. The total price for labor and materials per faucet is $562.02, coming in between $430.43 to $693.61.
How do you replace shower knobs?
Remove the decorative trimming, take out the screw, and take the knob off the valve. Then install in the new knob, making sure that the cold water knob is on the right, while the hot water knob is on the left. Turn on the water supply and test out the knobs.
Where is the shower valve located?
Shower/Bathtub – Some shower or bathtub shutoff valves may be underneath the sink, but if they’re not, check in the basement (if you have one) directly below the bathroom.
Where is my shower valve?
The shutoffs for the shower are typically located to the sides of the valve, one for hot water and one for cold water – both need to be shut. If you are unable to locate the shower shutoff valves, shut off water to your entire home at the home’s main shutoff valve for the duration of this project.
How do you measure faucet size?
Make sure to measure your faucet centers. This refers to the distance, in inches, between the pre-drilled faucet holes in the sink or vanity, from the very center of the left hole to the very center of the right hole. These center points should correspond to the center connections of the faucets to be installed there.
How do I know what cartridge my faucet is?
If you cannot locate any markings on the faucet, you can start disassembling it; start with the handle. You’ll be able to measure the cartridge (stem) length of the faucet or resort to the number of splines.
How do I identify my faucet model?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”
How do I know if my shower valve is bad?
– Trouble Turning the Handle. Do you have difficulty turning on your shower? …
– Unexpected Temperature Changes. Most of us have our perfect, preferred shower temperature, so even a small change in temperature is going to be immediately noticeable. …
– Loss of Water Pressure. …
– Shower Head Leaks.
Are all Delta shower valves the same?
Delta manufacturers their Shower Valves to be universal. This means you can simply remove the Trim Kit (which installs over the tile) and switch it out.
Are faucet cartridges universal?
Each handle of the two-handle set is attached to a separate cartridge, one for hot and one for cold. Temperature mixing is accomplished by increasing or decreasing the flow of hot and cold water inside the faucet. The cartridges are usually not interchangeable.
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.