1 Factory Reset
- Ensure the router is ON.
- Using a paper clip, push and hold the Reset button.
- Hold the reset switch for 10-15 seconds.
- Disconnect and reconnect the router’s power adapter.
- Once it fully reboots, you can use the default username and password to connect the device.
Similarly, How do I access my Linksys router settings?
How to access the router’s web interface
- Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
- Enter your login credentials in the fields provided. The default password is admin.
- To know if you have successfully logged in to the web interface, the screen below should appear.
Additionally, Why won’t my Linksys router connect to the Internet? To resolve this issue, you can reset your router to factory default settings, uninstall and reinstall the Linksys Connect Software on your main computer, then reconfigure your router’s settings through Linksys Connect. … To learn how to reconfigure your router with Linksys Connect, click here.
Why is my Linksys Wi-Fi not working?
The quickest and easiest workaround for most issues concerning Linksys routers is to powercycle the device. To do this, power OFF the router, unplug the power cord and wait for 10 seconds before plugging it back in. … Low signal quality received from your wireless router. Outdated router firmware.
What happens if I reset my Linksys router?
Once you reset the router, the settings will be reverted to its factory defaults. All of the customized settings of the router (Wi-Fi name (SSID), wireless security, etc.) will be erased. IMPORTANT: If you want to restore the router’s original settings without re-configuring it, you have to save a backup file.
Why can’t I access my Linksys router settings?
To resolve this issue, you can reset your router to factory default settings, uninstall and reinstall the Linksys Connect Software on your main computer, then reconfigure your router’s settings through Linksys Connect. To learn how to reset your router to factory settings, click here.
How do I log into my 192.168 1.1 IP address?
How to Login 192.168.
1.1?
- Turn on your router and connect it to your computer with an Ethernet cable. …
- Open your favorite web browser and type “http://192.168.1.1” into the address bar. …
- Enter the correct router login/password combination.
How do I log into my Linksys Smart WIFI router?
Accessing your Linksys Smart Wi-Fi through a web browser
- Launch a web browser.
- Enter your router’s default IP address, “192.168. …
- Enter your Router Password then click Log in.
- Launch a web browser and enter “linksyssmartwifi.com” in the Address bar then press [Enter].
How do I get my Linksys back online?
To resolve this, turn the device/devices OFF, then turn each of them back ON one by one. If you’re still having the same problem, turn your devices OFF again then access your Linksys cloud account.
Can connect to router but not to Internet?
If the Internet works fine on other devices, the problem lies with your device and its WiFi adapter. On the other hand, if the Internet doesn’t work on other devices too, then the problem is most likely with the router or the Internet connection itself. … If your router and modem are separate, restart both.
Why does my Linksys router say its offline?
If you discover that the Linksys router is still offline, you can follow some troubleshooting methods as under: Your router may also show offline status if the internet speeds are too low. A slower-than-normal internet speed may be a result of the IPv6 feature. You can try disabling the same.
Is Linksys WiFi down?
Linksys.com is UP and reachable by us.
What do the lights on my Linksys router mean?
Internet (White / Amber) – The Internet LED is solid white when connected to the Internet. It blinks white while the router works to establish a connection. A solid amber LED indicates the connection is down due to configuration issues. Amber blinking indicates that the connection is down due to hardware issues.
Do Linksys routers go bad?
Sadly, many routers fall well short of that. In theory, a router should last decades, essentially forever. … I find secondhand working Linksys WRT54G routers all the time. They’re obsolete, because they only work on a 2.4ghz network and they can’t keep up with modern Internet speeds, but they still route packets happily.
Will resetting my router mess up my Internet?
It’s important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. … The most universal way to reset a router, however, is via the reset button, usually found on the router’s back or underside.
What happens if you reset router?
Router reset will wipe out all of your customized settings. Router username and password will be reset to factory default values as shown on the router label. Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.
Does resetting router change WiFi password?
It’ll take a minute or two for the router to restart, but most connection issues can be solved by doing this. Once you reset the router, the password for logging into the web interface and the WiFi password will be reset to their default passwords.
How do I access my wireless router admin?
Do this by typing the router’s IP address (in the format http://192.168.1.1) in the browser’s address bar. Enter the administrative login information—username and password—to authenticate and access the admin settings.
How do I find the IP address of my Linksys router?
- Click Network.
- Click on Wi-Fi then click the Advanced… button.
- Select TCP/IP. Your router’s local IP address should be displayed in the Router field. In the example below, the local IP address of the router is 10.150. 104.80.
What is the IP address for Linksys router?
The default IP address of a Linksys router is “192.168. 1.1”.
Why is 192.168 1.1 not opening?
If you cannot reach the login page, it may be due to: A hardwired connection configuration issue (such as a bad Ethernet cable) Entering the IP address incorrectly. An IP address issue on the computer.
How do I access my router admin page?
Do this by typing the router’s IP address (in the format http://192.168.1.1) in the browser’s address bar. Enter the administrative login information—username and password—to authenticate and access the admin settings.
How do you log into a IP address?
Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.