– First, locate the pilot valve on the furnace. …
– Find the gas valve and turn it to the “off” position. …
– Turn the valve to the “pilot” position.
– Press and hold the reset button.
– If the reset button fails, ignite the lighter.
– Open the door/cover over the pilot light access. …
– Use a flashlight or a headlamp to find the burner inside. …
– Turn the gas knob to “Pilot,” press and hold it down. …
– While still holding the gas down, light that pilot. …
– When the flame ignites, continue to hold the gas knob or button down for a full minute.
Subsequently, Why has my pilot light gone out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Also, Can I manually light my gas water heater?
Turn the water temperature dial to Low and the On/Off/Pilot dial to Pilot. Push the On/Off/Pilot dial downward with one hand while lighting the barbecue lighter with the other. Quickly hold the barbecue lighter over the end of the pipe by the burner. The flame should light instantly.
Can I relight the pilot light by myself?
Pilot lights were once standard on all gas furnaces, but newer systems don’t always contain pilot light ignition systems. Instead, some newer furnaces use electronic ignition systems. … Often, homeowners can relight the pilot themselves.
Last Review : 4 days ago.
Is it dangerous if the pilot light goes out on water heater?
Is it Dangerous if the Water Heater’s Pilot Light Goes Out? In most cases, it isn’t dangerous when the water heater pilot light is extinguished. This is because modern gas-fueled water heaters feature valves that automatically close the supply of gas when the pilot light goes out.
Can a pilot light relight itself?
Pilot lights were once standard on all gas furnaces, but newer systems don’t always contain pilot light ignition systems. Instead, some newer furnaces use electronic ignition systems. … Often, homeowners can relight the pilot themselves.
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
Why has the pilot light gone out on my boiler?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Why is there no pilot light on my boiler?
If the pilot light on your boiler has gone out, the cause is usually debris blocking the jet. … Even a small spec of dirt can block it, cause the pilot light to go out, and then the boiler won’t re-ignite. These jets are cheap to replace, but they can usually be removed, cleaned and reinstalled to fix the problem.
What do I do if pilot light goes out?
– Turn off your appliance at the power switch or thermostat.
– Find the gas valve control knob and turn it to select “pilot.”
– If pilot light controls are sticky, do not apply force or use oil. …
– Press the red button while simultaneously holding a match to the pilot burner.
What do I do if my pilot light won’t light?
If the pilot doesn’t relight, if it goes out right after lighting or if it goes out repeatedly, by far the most common cause is a bad thermocouple. The good news: You can usually replace a thermocouple for minimal cost and in less than an hour.
Is it dangerous if my pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.
How do you light a hot water heater manually?
Lighting the Pilot Light on a Manual Hot Water Heater Turn the pilot dial to the off position and wait 5-10 minutes for any gas to dissipate. Then, turn the pilot dial until it says the word pilot. After that, set your temperate knob to low. Now, hold the pilot dial down while you light the burner.
Is it dangerous if the pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.
Should a pilot light always be on?
Some pilot light tubes have automatic shut-offs if the flame goes out, but not all of them do, so each and every pilot light in the home should be routinely checked to make sure it is always on. If it goes out, open the doors and windows to let any gas out of the residence.
How do you light a hot water heater with an electric igniter?
On some water heater models, you press and hold down a separate red button to start the pilot burner gas flow. If your heater has a built-in piezo-electric spark pilot igniter, look for a red or black button labeled “Ignition” on the top or side of the gas valve. Push the button to ignite the pilot.
Can a pilot light just go out?
Improper Venting & Airflow Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.
Can I relight my own pilot light?
Pilot lights were once standard on all gas furnaces, but newer systems don’t always contain pilot light ignition systems. Instead, some newer furnaces use electronic ignition systems. … Often, homeowners can relight the pilot themselves.
How do you light an electric electronic water heater?
– Set the temperature control. to its lowest setting.
– Set the on-off control. to the pilot setting.
– Press the hot water heater. pilot button down and. hold it.
– While looking through the the sight glass slowly press the spark generator until you here it click. You should see a spark. from the generator and the.
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.