With the car off press and hold the ODO button. Step on the brake and hit the power button to go into READY (may work with IG ON too?). Keep holding the ODO button and watch the dash where the odometer readout usually is…you’ll see dashes then the prior odometer reading will return and you can let go of the button.
Press and hold the car horn for about 30 seconds to drain any electricity from the vehicle’s capacitor. Wait to reconnect the battery. You’ll want to wait about 15 minutes for the error codes to be deleted and the engine light to turn off. Once that’s done, you can go ahead and re-install the car battery cables.
Subsequently, How do you turn off the check engine light on a 2007 Prius?
Hold down the brake and press the power button one time to turn the car on. Continue holding down the brake, and then press the ODO trip button. (The ODO button is located by the hazard lights.) (If the glass readout says TRIP, you may have to change it to ODO for this whole process to work.)
Also, How do you reset the check engine light on a Prius?
Press and hold the car horn for about 30 seconds to drain any electricity from the vehicle’s capacitor. Wait to reconnect the battery. You’ll want to wait about 15 minutes for the error codes to be deleted and the engine light to turn off. Once that’s done, you can go ahead and re-install the car battery cables.
How do I turn my check engine light off?
– 4 Ways to Turn off the “Check Engine” Light. Method. …
– Drive Your Car and Let the Light Go off by Itself. …
– Turn the Car on and off Three Times. …
– Disconnect and Reconnect the Battery. …
– Use an OBD Code Reader.
Last Review : 13 days ago.
How do you reset check engine light?
– 4 Ways to Turn off the “Check Engine” Light. Method. …
– Drive Your Car and Let the Light Go off by Itself. The first and easiest method for clearing the check engine light is driving and time. …
– Turn the Car on and off Three Times. …
– Disconnect and Reconnect the Battery. …
– Use an OBD Code Reader.
Can you reset a check engine light yourself?
Insert the key in the ignition, turn the car on for a second, and turn it off for another second. Repeat this process three times. Once you turned your car on/off three times, the check engine light should go away by itself.
Can I disable my check engine light?
As others have already pointed out, you can simply remove the lamp or disconnect it and it won’t light up. You could use the power line for another lamp that goes on during the startup check but doesn’t normally come on if you want to make sure it does come on during the startup check.
How do you reset the check engine light on a 2006 Toyota Prius?
With the car off press and hold the ODO button. Step on the brake and hit the power button to go into READY (may work with IG ON too?). Keep holding the ODO button and watch the dash where the odometer readout usually is…you’ll see dashes then the prior odometer reading will return and you can let go of the button.
How do I clear my check engine light?
– 4 Ways to Turn off the “Check Engine” Light. Method. …
– Drive Your Car and Let the Light Go off by Itself. The first and easiest method for clearing the check engine light is driving and time. …
– Turn the Car on and off Three Times. …
– Disconnect and Reconnect the Battery. …
– Use an OBD Code Reader.
Is it bad to reset check engine light?
Do not be fooled. The reset does not make any repairs. The only time a driver should allow their car to undergo a check engine light reset is when the car has all the right repairs and the light is still there. The reset should only be from a professional technician.
What happens when you reset check engine light?
The simplest most straightforward way to get rid of the check engine light is to drive it for a little bit, and the light will turn off by itself. Once you drove your car for a couple of days (e.g., usually three days), the check engine light should be gone.
Does disconnecting the battery reset the check engine light?
Leaving the battery disconnected for about 15 minutes will ensure the vehicle systems will completely reset when you reconnect the battery. … Disconnecting the battery will clear the error codes and reset the check engine light.
How do you clear the code on a Prius?
– Connect the scan tool to the onboard diagnostic connector. This is found under the steering column. …
– Press the READ button on the scan tool, and look for any error codes.
– Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.
Will check engine light reset itself?
Your vehicle’s check engine light will will reset by itself once the issue or problem has been repaired; this is true for most models. … If you are certain that you have resolved the issue that caused your check engine light to come on in the first place, then the light should reset itself after at least 20 cycles.
How do you reset the check engine light on a 2015 Prius?
How do you reset the maintenance light on a 2006 Toyota Prius?
To reset the oil maintenance light press the display until it reads the odometer reading, turn the power switch off, press the power switch to ignition on while holding down the trip meter reset button, keep the trip reset button held down for about 10 seconds , the display will read 000000 and then the light will go …
Can Autozone clear a check engine light?
Yes, we can help you clear your code; it’s called telling you how to fix your damn car. Like others have said, even after clearing it, the light will come back on within 30-50 miles of driving.
How do you reset the maintenance required light on a 2008 Prius?
– Push the start button to ACCESSORY MODE. Ignition ON Only.
– Press The ODO/TRIP BUTTON To Display To ODO. image for reference only.
– Then Turn The IGNITION To OFF.
– Press And Hold ODO/TRIP BUTTON And Push the start button to Accessory Mode/Ignition. …
– Then Turn The Ignition OFF.
Why is my Prius check engine light on?
Whenever the Check Engine Light is on there’s a possibility the engine is emitting excessive emissions out the tailpipe. In extreme cases other parts in the system can be damaged, like the Catalytic Converter or Oxygen Sensor.
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.