one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete.
Thereof What is the cost of concrete driveway NZ? In New Zealand, a standard driveway on an accessible residential site will set you back around $120 – $450* per square metre. That includes everything from start to finish, including labour, materials delivery, creating the sub-base, pouring the concrete and adding the finishing touches.
How many bags of concrete do I need for a 10×12 slab? Regarding this, “how many bags of concrete do I need for a 10×12 slab?”, at 4 inches thick, generally you will need approximately either 86 bags of 60lb or 67 bags of 80lb of premixed concrete for a 10×12 slab, at 5 inches thick slab, either 109 bags of 60lb or 84 bags of 80lb premixed concrete are required, while at 6 …
Similarly, How thick should a concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How thick should a concrete slab be for a shed?
The best concrete thickness for a shed tends to be 4 inches which is the standard size used for most residential concrete patios, walkways and sidewalks. You can pour 6-8 inches if your storing something heavier but it’s rare. Concrete slabs are typically poured over 4-8 inches of compacted gravel and earth.
What is the cheapest driveway option? Gravel and Stone Driveways
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
How much does a concrete patio cost NZ?
How much does a patio cost? Patios made from paving of around 4 m x 4 m on a flat site with no excavation needed will cost around $2,250. The more work required to prepare the site, the higher the cost of the patio will be. Coloured concrete can be used for patios – this retails for around $100m2.
How thick should a concrete driveway be NZ? A minimum of 100 mm is recommended. Thickness is a major factor in determining the driveway’s structural capacity. Increasing your driveway’s thickness from 100mm to 125 mm will add to your concrete cost, but the additional 25mm of concrete will add almost 50% to the load carrying capacity of your driveway.
How thick should a concrete driveway be?
As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How thick should a concrete patio be? Four inches is the minimum thickness for a concrete patio. You’ll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.
How much area does an 80 pound bag of concrete cover? 80 lb bag of concrete yields 0.60 cubic feet which is approximately around 0.0222 cubic yards that will cover around 3.6 sq ft area up to standard depth of 2 inch excavation or backfills, and for 1 cubic feet of landfill you will need 1.66 bags of 80 lb concrete.
How many yards of concrete do I need for a 10×10 slab? The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
Do you have to put gravel down before pouring concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
How many yards of concrete do I need for a 24×24 slab?
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
Do you need rebar for 4 inch slab? The thickness of rebar should be no more than 1/8 that of the slab, so a 4” slab shouldn’t have steel greater than #4 or 1/2″ bar. It’s best to check with a Structural Engineer if your slab will bridge or cantilever. What is this? For 4” concrete slabs used for driveways and patios, #3 rebar is common.
How many bags of concrete do I need for a 10×10 slab? The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
Is it cheaper to pour your own concrete?
Whether you’re pouring concrete countertops or a patio out back, it may be cheaper to pour concrete yourself rather than hiring someone. Whether you’ll save much in doing so depends largely on the amount of concrete needed and the amount of time you have to invest in your concrete project.
Is blacktop cheaper than concrete? The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do I make a budget driveway?
Driveway ideas on a budget
- Install practical paving channels to cope with the wet weather.
- Seal your driveway paving.
- Bring a touch of nature to your driveway.
- Consider installing hard-wearing paving.
- Maintain your driveway properly.
Is it cheaper to tarmac or concrete? Is tarmac cheaper than concrete? The cost to initially lay the Tarmac is cheaper than concrete. But, if you take into account the lifespan of a typical driveway, the concrete will win every time. Concrete is extremely durable and can last for at least 40 to 50 years.
How much will a concrete slab cost?
A concrete slab costs between $4.34 and $7.73 per square foot, with an average cost of $6.60 per square foot. The national average cost of a concrete slab is $6.60 per square foot for materials and labor. Most homeowners can expect to pay between $4.34 and $7.73 per square foot for concrete installation.
Is paving cheaper than decking NZ? When choosing between decking or paving, consider that decking materials tend to be more affordable than paving materials. However, these costs can be offset with the maintenance costs of decking that paving does not require.
How do you lay a concrete driveway NZ?
Don’t forget to share this post !