As part of the LINEA® system, Resene offers James Hardie customers a 15 year paint guarantee. The maintenance regime includes regular washing of the exterior, checks of the finish, and a repaint after 10 years.
Thereof How do you cut fibre cement weatherboards? Dust reducing circular saws fitted with a HardieBlade Saw Blade are suitable for cutting James Hardie fibre cement products. Before cutting any product, you should review the installation recommendations in the technical information for that specific product.
Is Linea weatherboard expensive? LINEA WEATHERBOARDS 180MM – $10K GETS ABOUT 172 SQUARE METERS WORTH.
Similarly, What is linear weatherboard?
Lineaâ„¢ Weatherboard is a 16mm thick, pre-primed bevel back fibre cement weatherboard and is classified as lightweight wall cladding suitable for residential and light commercial construction using timber framed external walls. Linea Weatherboard is available in 135mm, 150mm and 180mm widths.
How do you paint Linea weatherboard?
How to paint Linea weatherboards
- Ensure the surface is clean and dust free.
- Fill any nail holes using Contract filler and gaps with Selleys Exterior No More Gaps.
- Spot prime filled areas with Resene Quick Dry Primer.
- Topcoat options: Recommend 3 coats of Resene Sonyx 101 waterborne semi-gloss.
Can you cut Hardie board with a jigsaw? A jigsaw can cut straight cuts, rounded cuts, and is the best choice if you need to cut a circular piece or an irregular shape out of the cement board. Fit the jigsaw with a metal-cutting blade or a carbide-grit blade.
Can you drill into Fibre cement?
Cement-fiber siding is a commonly used building material. It is a concrete product that is light, flexible and has a woodlike finish. It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit.
How do you make a hole in Hardiflex?
What is Scyon cladding?
Scyon Cladding
A technology allowing fibre cement boards, sheets and trims to be beautiful and easy to build with. … Conventional fibre cement is limited to around 9mm before it’s too difficult to nail. The beauty is more than skin-deep. The Scyon formulation helps simplify and speed up construction.
What is Axon cladding? Axon™ cladding is made from Scyon,™ the advanced lightweight cement composite with heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, but it can also be gun nailed and is easy to cut – like timber.
What is Linea cladding? James Hardie’s Linea are an enduring weatherboard for beach houses, Hamptons homes, country cottages and modern masterpieces. … Even when moisture gets in, Linea weatherboards resist swelling, shrinking and cracking to hold paint longer.
What is oblique weatherboard? Linea Oblique Weatherboard can be used to create colourful feature walls, full cladding for new builds, cladding for additions and renovations and internal feature walls. It is lightweight and durable, making it ideal for overhangs, protective cantilevers and other striking architectural features.
What is Linea weatherboard made from?
1.1 Lineaâ„¢ Weatherboard is a bevel-back fibre cement weatherboard, which is designed to be used as part of an external wall cladding system for residential and light commercial type buildings where domestic construction techniques are used.
Where is Linea weatherboard made?
Lineaâ„¢ Weatherboard was developed and perfected right here in New Zealand. It’s a proven product that has been used by builders for the past 20 years and is now offered in overseas markets.
Can you paint weatherboards with a roller? Weatherboards will need to be painted with a small roller, brush or spray, while brick and render can be painted with sprays or extra-long nap rollers. If you’re painting anything other than weatherboards you’ll need to add a few additional materials. Finally, paint the trims and windows.
What is the best way to paint weatherboards?
Do you need to sand weatherboards before painting?
Scrape off flaking paint. Sand all the surfaces to a flat finish, that’s all the weatherboards! Sanding is very important not just in getting to a better surface but to promote better adhesion between the layers. Your paint job will last much longer if you sand everything.
Do you need a special blade to cut Hardie board? You shouldn’t use a wood blade to cut Hardie or other fiber cement siding. The higher teeth-per-inch count creates more fine dust particles. This increases the installer’s exposure to respirable silica dust, which can lead to future health problems.
What is the best way to cut Hardie board?
A carbide-tipped scoring knife is recommended, but you can also use a utility knife or shears. Never use a high-speed grinder to cut cement board indoors, since this can create a dust hazard.
How do you cut Hardie plank?
What kind of screws are used for Hardie board?
James Hardie recommends 1-1/4” long galvanized or STAINLESS steel roofing nails or 1-1/4” long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8” HD.
Can you hammer a nail into Hardie board? Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.
Will Hardie board hold a screw?
What type of fastener do you recommend for floor and wall applications of HardieBacker® cement board? In compliance with the tile industry, James Hardie recommends 1-1/4” long galvanized or stainless steel roofing nails (0.121” shank x 3/8” HD) or 1-1/4” long corrosion resistant ribbed waferhead screws (No.
Don’t forget to share this post !