DVD players will display on one of the Input or Auxiliary channels. They will not show up on Channel 3 or 4 like some VCRs. Some TVs will label the Input channels based on the type of input, such as “HDMI”, “AV”, and “COMPONENT.” Refer back to Method one if you have a question about which input type you are using.

Similarly, Why is my DVD player not showing on my TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. … If not, the DVD player should be set to output an interlaced signal.

Additionally, How do I get my DVD player to work on my LG TV? Turn both devices around, plug in their power cables and turn both devices on. Press the “Input” button on your television’s remote control or on your television’s front panel until “HDMI” or “HDMI 2,” or “AV” or “AV 2” or “Component” is displayed on its screen and you see the LG logo transmitting from the DVD player.

What do you do when your DVD player wont play?


How to Fix DVD Won’t Play – 7 Solutions

  1. Solution 1: Check if the DVD type is incompatible with DVD player.
  2. Solution 2: Clean the dirty DVD or try a different disc.
  3. Solution 3: Ensure solid connection between DVD player and TV.
  4. Solution 4: Install Third Party DVD Player Software.
  5. Solution 5: Update DVD Firmware.

Why is my DVD player not working?

Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read/load errors. … DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools.

What causes a DVD not to play?

Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.

How do I change the input on my LG TV?


Changing the Input

  1. Turn on your LG TV and open Home Screen.
  2. Open the Inputs menu on the top right corner, using your remote control.
  3. You’ll now see a list of all connected devices.
  4. Select the input you want to use.
  5. Confirm.

How do I get my LG TV to turn on HDMI?


How to turn on HDMI-CEC on 2018 LG TVs

  1. Open the general Settings menu. To begin, open the general Settings menu, or open the Quick Settings menu and then navigate to the Advanced Settings icon at the bottom of the menu.
  2. Find the Simplink option. …
  3. Turn on Simplink. …
  4. Turn on Power Sync.

Why is my LG TV HDMI not working?

LG TV Doesn’t Recognize HDMI

If your LG TV does not recognize your HDMI link, try restarting it to reset its mechanics. To do so, unplug all HDMI wires and then disconnect the power line for around 10 minutes. After that, connect the power cable and HDMI wire to see if there are any improvements.

How do I fix my DVD drive not reading?


To reinstall the driver, follow these steps:

  1. Press the Windows logo key + R to open the Run dialog box.
  2. Type devmgmt. …
  3. In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then select Uninstall.
  4. When you are prompted to confirm that you want to remove the device, select OK.

How do you reset a DVD player?

You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled “reset” or “Initialize mode” .

Why my DVD drive won’t read discs?

A dirty or scratched disc surface is the most common reason for a CD/DVD issue when inserted into a computer. Check the disc for damage and confirm that the disc is compatible with your computer. Clean the disc and check for damage: Clean any dust or smudges from the disc with filtered water and a lint free cloth.

How do you fix a DVD that is not reading?


How to Fix Sony or Other DVD Player Not Reading/Loading Disc?

  1. Check if the disc is placed correctly and if the disc is in good condition. Make sure the disc isn’t put in upside down and also ensure the disc isn’t out of alignment in the loading tray. …
  2. Check DVD player’s loading tray, laser lens and servo alignment.

How do I fix a bad DVD?

Clean the disc with warm water, soap, and a cloth and then dry it, making sure that no lint is left behind. Squeeze toothpaste onto the disc and rub it on the disc in a straight motion from the center out to the edges. Finally, wash off the toothpaste and dry the disc. It should work now!

How do you clean a DVD that won’t play?

Mix rubbing alcohol and water in a one-to-one ratio and use it to clean the DVD to remove fingerprints or other oily residue. Rubbing alcohol works well because it is mild and evaporates quickly without leaving a residue. Rub the disk with a little of the solution and let it dry. 4.

Where is the input button on an LG TV remote?

From the home screen, open the Inputs menu, found in the upper-right corner of the home screen. 2. Select Input. Selecting the Input icon will display a list of connected media sources.

How do you change the AV on a LG TV without the remote?

Press the “INPUT” button located with the other buttons on your television. This button might also be called the “VIDEO” button. This button will switch between your television’s video modes. If there is no such button on your television, simply press one of the channel changing buttons.

How do I get my LG TV to play on HDMI without remote?

While most LG TVs would require a controller, you can control it without the remote! You can use a computer mouse and connect it to your TV, you can use an app, or you can use the buttons on the TV!

How do I change my TV to HDMI without remote?

It is possible to change the TV’s input mode by pressing a button labeled “Input,” then using either the channel or volume keys to select a desired input, even on older television models.

How do I fix my LG HDMI no signal?


Troubleshooting Tips

  1. Try switching to each other input, maybe the ports aren’t labelled correctly.
  2. Try connecting the HDMI cable into a different Input port, maybe the port is malfunctioning.
  3. Try connecting a different device to the TV (or the same device to a different TV), maybe the other deviceis causing the issue.

Why does my TV say no signal when HDMI is plugged in?

Verify that the source device has power and is turned on. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again. … Try a new or another known working HDMI cable.

Why is my TV not picking up HDMI?

Solution 2: Enable the HDMI connection setting

If you want to connect your Android phone or tablet to the TV, make sure the HDMI connection setting is enabled on your device. To do it, go to Settings > Display Entries > HDMI connection. If the HDMI connection setting is disabled, enable it.

How do you fix a CD drive that won’t read discs?


Update Your CD Drivers

  1. From the Start menu, search for Device Manager.
  2. Find your DVD/CD-ROM drivers tab.
  3. Right-click your CD Drive from DVD/CD-ROM and select Properties.
  4. Click the Driver tab and select Update Driver. Follow the prompts.

Why won’t my DVD player read my DVD?

Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.

General, knowledge