Error code 0xc0000017 is normally attributed to bad memory sections that was marked by Windows built in Boot Configuration Data which block the use of Random Access Memory (RAM) as a temporary store for data.

Also What is Bcdedit command?

BCDEdit is a command-line tool for managing BCD. It can be used for a variety of purposes, including creating new stores, modifying existing stores, and adding boot menu options.

Subsequently, What is the minimum requirements for Windows 10?
Windows 10 system requirements

  • Latest OS: Make sure you’re running the latest version—either Windows 7 SP1 or Windows 8.1 Update. …
  • Processor: 1 gigahertz (GHz) or faster processor or SoC.
  • RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit.
  • Hard disk space: 16 GB for 32-bit OS or 20 GB for 64-bit OS.

What is error 0xc0000098? 0xc0000098 is a BSOD error code that may appear after cloning OS or upgrading to Windows 10. This error code is caused by two issues: The BCD has no entry, which may be caused by disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

How do I use Bcdedit commands?

  1. Restart the computer.
  2. Press the F8 key to open Advanced Boot Options.
  3. Select Repair your computer. Advanced Boot Options on Windows 7.
  4. Press Enter.
  5. At the System Recovery Options, click Command Prompt.
  6. Type: bcdedit.exe.
  7. Press Enter.

What file does Bcdedit modify?

Administrative privileges are required to use BCDEdit to modify BCD. BCDEdit is the primary tool for editing the boot configuration of Windows Vista and later versions of Windows. It is included with the Windows Vista distribution in the %WINDIR%System32 folder.

How do I check my Bcdedit status?

To view the current boot entries and their settings, use the bcdedit /enum command. This command displays the active boot entries and their associated globally unique identifiers (GUID). Use the identifiers with the /set command to configure options for a specific boot entry.

Is 2GB RAM enough for Windows 10?

2GB of RAM is the minimum system requirement for the 64-bit version of Windows 10. You might get away with less, but the chances are that it’s going to make you yell a lot of bad words at your system! … Sure, the shortage of RAM is going to be a bottleneck on your system, but 2GB is enough to get some real work done.

Is 4GB RAM enough for Windows 10?

According to us, 4GB of memory is enough to run Windows 10 without too many problems. With this amount, running multiple (basic) applications at the same time is not a problem in most cases. … Extra information: Windows 10 32-bit systems can use a maximum of 4 GB RAM.

Is 3 GB RAM enough for Windows 10?

Technically you might be in spec with 3 gb RAM. Microsoft lists the Windows 10 minimum hardware requirements as: Processor: 1 gigahertz (GHz) or faster processor or SoC. RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit.

How do I fix error 0xc0000098?

1) Boot your PC from your setup disk (USB/DVD/CD). 2) Select Repair your computer and go to Troubleshoot > Advanced Options > Startup Repair. 3) Startup Repair will begin scanning your installation for known issues and will attempt a repair if it finds any. 4) If it fails, you can run Startup Repair again.

How do I fix error 0xc0000098 in Windows 7?


How to Fix Boot Error 0xc0000098 on Windows 7/8 and 10

  1. How to BOOT into BIOS to change Boot Order.
  2. Rebuild and repair the Master Boot Record, Boot Sector and Boot Configuration Data (Windows 7/8 and 10)
  3. Method 2: Use Startup Repair.
  4. Method 3: Run the System File Checker utility to scan your system.

How do I reinstall Windows 10 home?

The simplest way to reinstall Windows 10 is through Windows itself. Click ‘Start > Settings > Update & security > Recovery’ and then choose ‘Get started’ under ‘Reset this PC’. A full reinstall wipes your entire drive, so select ‘Remove everything’ to ensure a clean reinstall is performed.

How do I manually rebuild my BCD?


Rebuild BCD in Windows 11/10

  1. Boot your computer into Advanced Recovery Mode.
  2. Launch Command Prompt available under Advanced Options.
  3. To rebuild the BCD or Boot Configuration Data file use the command – bootrec /rebuildbcd.
  4. It will scan for other operating systems and let you select the OS’s you want to add to BCD.

How do I turn on auto repair?

  1. In Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter.
  2. Restart your PC, the Automatic Startup Repair should be disabled and you might be able to access Windows 10 again.
  3. If you need to again enable it, you can type bcdedit /set {default} recoveryenabled Yes in CMD and press Enter.

How do I edit boot menu?

Editing Boot Options

To edit boot options in Windows, use BCDEdit (BCDEdit.exe), a tool included in Windows. To use BCDEdit, you must be a member of the Administrators group on the computer. You can also use the System Configuration utility (MSConfig.exe) to change boot settings.

What is a boot configuration data file?

Boot Configuration Data (BCD) is a firmware-independent database for boot-time configuration data. It is used by Microsoft’s new Windows Boot Manager and replaces the boot. ini that was used by NTLDR. … For UEFI boot, the file is located at /EFI/Microsoft/Boot/BCD on the EFI System Partition.

Where is BCDEdit file located?

The BCD information resides in a data file named bootmgfw. efi in the EFI partition in the EFIMicrosoftBoot folder. You will also find a copy of this file in the Windows Side-by-Side (WinSxS) directory hierarchy.

What does BCDEdit Deletevalue do?

The BCDEdit /deletevalue command deletes or removes a boot entry option (and its value) from the Windows boot configuration data store (BCD). … A common scenario for using the BCDEdit /deletevalue command is to remove boot entry options when you are testing and debugging a driver.

How do I enable integrity checks?

Option 1 – Command to Enable or Disable

Type “command“. Right-click on “Command Prompt” and select “Run As Administrator“. Do one of the following: To disable device driver signing, type “BCDEDIT /set nointegritychecks ON” then press “Enter“

How do I view a BCD file?

The BCD information resides in a data file named bootmgfw. efi in the EFI partition in the EFIMicrosoftBoot folder. You will also find a copy of this file in the Windows Side-by-Side (WinSxS) directory hierarchy.

How much RAM does Windows 10 need to run smoothly?

Microsoft’s Teams collaboration platform has become something of a memory hog, meaning Windows 10 users need at least 16GB of RAM to keep things running smoothly.

Is a laptop with 2GB RAM good?

With 2GB you should be able to do pretty much everything with your computer that a computer is capable of doing, such as gaming, image and video editing, running suites like Microsoft Office, and having a dozen or so browser tabs open all become possible.

Which Windows is best for 2 GB RAM?


Herein we will delve into the best Operating Systems to install on your older laptop or desktop computer with just 2GB or 3GB RAM.

  • Windows 10.
  • Lubuntu.
  • Linux Mint.
  • Kubuntu.
  • Puppy Linux.
  • Xubuntu.
  • Android-x86.
  • OpenThos.

General, knowledge