Many tape measures add red numbers (or some other graphical standout) every 16-inches, a very common spacing for studs in house framing. This spacing allows for six supports in each 8-foot length. This spacing’s allow installing 8-foot-long sheets of plywood without cutting.

60 inches

Subsequently, What measurements are on a measuring tape?

On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them). As the increments decrease, so does the length of the mark. For example, Β½” has a bigger mark than ΒΌ” which has a bigger mark than β ”, and so on. Read 1 inch.

Also, What is 0.8 on a tape measure?

In inches what does 0.8 inches mean? is that about 1/2 inch? . 8 is 8/10 of an inch.

How do you read an 8th tape measure?

*Last Review : 12 days ago.*

## What is .75 on a tape measure?

Fraction Decimal Millimeters

——– ——- ———–

11β16β 0.6875 17.4625

3β4β 0.75 19.05

13β16β 0.8125 20.6375

7β8β 0.875 22.225

## What is .9375 on a ruler?

FRACTIONS INCHES MILLIMETERS

——— ——- ———–

15/16 .9375 23.813

61/64 .953125 24.209

31/32 .96875 24.606

63/64 .984375 52.003

## What is 0.7 on a ruler?

The 11/16 mark on a ruler is very close to 0.7 (0.6875). If you bought a decent steel ruler it would have 100ths on it and you count 7 from zero.

## How much is .8 of an inch on a ruler?

English Rulers Every mark is 1/8th of an inch. A ruler marked in 16ths. Every mark is 1/16th of an inch. The center mark between numbers is 1/2.

## What is the 8 foot rule?

For every 8-foot section of your wall, there should be six studs placed 16 inches apart. That’s why there are red numbers highlighted every 16 inches. If you use the tape measure, you can note exactly where the studs are by using the red numbers and marking the studs using a pencil.

## What is .375 inches on a ruler?

Fractions Decimal Millimeters

——— ——- ———–

23/64 .3594 9.128

3/8 .375 9.525

25/64 .3906 9.921

13/32 .4062 10.318

## How do you read a tape measure for dummies?

– Find/read the markings. On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them).

– As the increments decrease, so does the length of the mark. …

– Read 1 inch. …

– Read one-half inch. …

– The remaining markings follow a similar pattern.

## What is .375 in a fraction?

3/8

## What fraction is .8 of an inch?

Fraction (inches) Decimal (inches) Metric (millimeters)

—————– —————- ——————–

3/32β³ 0.09375β³ 2.38125 mm

7/64β³ 0.109375β³ 2.778125 mm

1/8β³ 0.125β³ 3.175 mm

9/64β³ 0.140625β³ 3.571875 mm

## How do you read decimals on a tape measure?

Simply count the number of spaces between graduations or marks contained within a single inch. If there are 10 the smallest graduation or mark is 1/10β or 0.1β as a decimal. If there are 100 the smallest graduation or mark is 1/100″ or 0.01″ as a decimal, etc.

## What is the .75 mark on a ruler?

Fraction Decimal Millimeters

——– ——- ———–

5β8β 0.625 15.875

11β16β 0.6875 17.4625

3β4β 0.75 19.05

13β16β 0.8125 20.6375

## What is 3/4 on a tape measure?

The mark directly in the middle of the inch denotes a measurment of 1/2″ whilst the markings either side of it represent measurements of 1/4″ and 3/4″ respectively. Even smaller marks then denote 1/8ths and 1/16ths (marked in red) of an inch.

## What is .8 as a fraction?

Decimal Fraction

———- ——–

0.8 4/5

0.83333333 5/6

0.85714286 6/7

0.875 7/8

## What is .375 as a fraction in simplest form?

375 divided by 125 equals 3, 1000 divided by 125 equals 8. The resulting simplified fraction is 3/8.

## What is 0.375 as a fraction in its simplest form?

The fraction would be 3751000. Therefore, 0.375 in fraction is 38.

[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]

*Spread the word ! Don’t forget to share.*