No, you cannot connect speakers directly to a TV. Most TVs do, however, provide audio outputs that allow you to connect them to self-powered (computer) speakers, a small external amplifier, or a home stereo receiver. The types of speaker system electronics & cables you need depend on your TV’s output jacks.
Most receivers and amplifiers are compatible with today’s leading speaker options. You should, however, study the specifications first. To match your speakers with a quality amplifier and receiver setup, you’ll need to know about impedance. Impedance is a speaker’s resistance.
Subsequently, Do you need a receiver with powered speakers?
These are called “passive speakers.” On the other hand, powered stereo speakers (also known as “powered monitors” or “active speakers”) are designed with built-in amplification, so they don’t require a receiver. Instead, you can connect powered speakers directly to a music source, such as a turntable or CD player.
Also, Can I use speakers without a receiver?
If you do not have a receiver or it is damaged, use a two-channel amplifier. … Get an amplifier and plug it into the TV set – the audio out port or the HDMI one. Stick the speaker into the amplified speaker output. You can use one or more speakers.
Can external speakers be connected to a TV?
If your TV doesn’t use RCA connectors for audio output, it may have a headphone out port (3.5mm port). You can use this to connect your TV to the speakers. They’re the same connector used on phones, tablets, laptops, etc. For this, you’ll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.
Last Review : 8 days ago.
Can you use speakers without a receiver?
If you do not have a receiver or it is damaged, use a two-channel amplifier. … Get an amplifier and plug it into the TV set – the audio out port or the HDMI one. Stick the speaker into the amplified speaker output. You can use one or more speakers.
Can I use my old speakers with new receiver?
Any AV receiver you buy will not have an amp for the sub built in so you would have to add one. You might be able to use the stereo speakers with an AV receiver by running both pair of wire from each speaker in parallel to the front speaker terminals.
How do I connect my TV to speakers?
Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the audio output jack of the television. Connect the other end of the cable to the corresponding jacks on the stereo receiver or home theater system.
Can you connect any speakers to a receiver?
In short, yes basically any surround set will work. Just watch the ohm load. Most home receivers are only stable from 6ohm to 8ohm. If you go with 6-ohm speakers they will pull a little more power from the receiver and be a little louder.
Do I need a preamp with powered speakers?
Most powered speakers still require a separate phono pre-amp. In any case, internal amplification and the built-in phono pre-amp eliminate the need for two separate components – a receiver and discrete phono pre-amp.
How can I reuse old speakers?
– Turn Old Desktop Speakers Into a Loud Charging Station. …
– Make an Internet Radio. …
– Turn Car Speakers Into a Boombox. …
– The Lethargic Option: Add a Chromecast. …
– Repurpose Grills as Earring Holders. …
– Speakers Make Excellent Bookshelves and Wooden Furniture. …
– The Coolest Media Cabinet in the World.
Can I connect portable speaker to TV?
Yes, wireless speakers can be connected to a TV with a Bluetooth Transmitter. Most Bluetooth Transmitters connect to a TV with a 3.5mm headphone jack or component audio output ports. They then Pair to Bluetooth speakers playing the TVs sound wirelessly. Connect a Bluetooth Transmitter to the TV audio output.
Can I use a 7.2 receiver with 5.1 speakers?
connect 7.2 receiver to 5 individual speakers which accept speaker wire connections plus one subwoofer – yes, this is easily possible. connect 7.2 receiver to the 5.1 “package Speakers” such as PC speakers – In theory it’s possible but you should look at how the speakers accept connections.
Can I connect active speakers to an amplifier?
Powered speakers can be connected to music sources like CD players, turntables and computers directly. They are self-powered by their built-in amplifier. So, the answer is no. Powered speakers don’t need an amplifier.
Can you have surround sound without a receiver?
Soundbars with wireless surround speakers A soundbar/wireless rear speaker/wireless subwoofer combination does away with the need to run cables across your room. … The result is amazing surround sound with movies without the need for an AV receiver. Simply connect the soundbar to the television via HDMI and enjoy!
How do I know if I need a preamp?
To check if a receiver has a built-in preamp, check if the receiver has a PHONO input. A receiver with a PHONO input definitely has a built-in preamp. If your receiver has a PHONO input, you can connect a turntable without a phono preamp to that input. This way, you will use the preamp that is built into the receiver.
Will old speakers work with new receiver?
Any AV receiver you buy will not have an amp for the sub built in so you would have to add one. You might be able to use the stereo speakers with an AV receiver by running both pair of wire from each speaker in parallel to the front speaker terminals.
Do you really need a preamp?
The purpose of a preamp is to amplify low level signals to line level, i.e. the “standard” operating level of your recording gear. … So you need a preamp for just about any sound source. But this doesn’t have to be an external device. Most audio interfaces already come with built-in preamps.
Do you need an amplifier for active speakers?
Powered speakers don’t need an amplifier. … In a pair of active speakers, each speaker has its own amplification. A pair of active speakers include not only one amplifier each, but one amplifier for each driver each. So a pair of 2-way active speakers will have no less than four amplifiers built-in.
Will wireless speakers work with any receiver?
You can indeed connect Bluetooth speakers and headphones to an older stereo system or TV by using an inexpensive device called a Bluetooth Transmitter/Receiver like this one from TaoTronics. … All you have to do is connect the device to your stereo’s audio output jacks and then pair the speakers to the transmitter.
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.