1. Power the laptop off.
  2. Hold down Windows key + up arrow + down arrow and power the laptop on.
  3. Let go of the keys at the HP splashscreen.
  4. Press F10 repeatedly at the screen that shows up with “SMC command handled successfully”

Besides, How can I bypass BIOS administrator password?

On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.

Keeping this in mind, How do I find my master BIOS password? BIOS passwords cannot be recovered. If you have forgotten one of the passwords that is set in the BIOS, resetting the CMOS or NVRAM helps reset the BIOS to factory default settings and remove the passwords from the BIOS. WARNING: Clearing the CMOS or NVRAM using a jumper resets the passwords in the BIOS.

How do I reset my HP Elitebook 840?

To perform a hard reset, press and hold the Power and Mute buttons simultaneously for at least 15 seconds or longer if needed, until the computer turns off.

How can I remove BIOS password?

How to Disable BIOS Password

  1. Shut down the laptop. …
  2. Press the key required to enter the BIOS area of your laptop. …
  3. Enter the current BIOS password for the laptop when prompted to do so.
  4. Click the “Password” or “Security” tab in the BIOS setup menu, and then click the “Supervisor Password” or “BIOS Password” option.

Is there a default BIOS password?

Most personal computers don’t have BIOS passwords because the feature has to be manually enabled by someone. … On most modern BIOS systems, you can set a supervisor password, which simply restricts access to the BIOS utility itself, but allows Windows to load.

How do I find my BIOS password Windows 10?


Reset your BIOS password with a backdoor password

  1. Boot your PC.
  2. Try to access the Boot Menu and intentionally type in the wrong BIOS password 3 times. …
  3. Note the code down.
  4. Go to bios-pw.org/ and enter the code.
  5. Press Get Password.
  6. The website will generate passwords similar to the one you used.

What is the BIOS administrator password?

In BIOS, You can set up two types of password: Administrator Password: The Computer will prompt this password only when you are trying to access the BIOS. It is used to prevent others from changing the BIOS settings. System Password: This will be prompted before the operating system can boot up.

How can I reset my HP laptop back to factory like brand new?

There are two ways to access the reset option:

  1. Click on the Start menu and choose the “Settings” option. This looks like a cog wheel, and it is where you will access all of the major settings on your laptop.
  2. In the search bar, type “reset.”
  3. From there, choose the “Reset this PC” option once the results have popped up.

How do I remove the BIOS password in Windows 10?

In BIOS, look for the Security tab and form there you should be able to remove the Administrative password . .

How do I disable password before BIOS?

Use Dell BIOS to disable Pre-boot authentication

  1. Reboot the machine and press F2 at the Dell BIOS Splash Screen.
  2. Enter the System or Admin Password to access the BIOS settings.
  3. Navigate to Security > Passwords.
  4. Select System Password. …
  5. The System Password status will change to ‘Not Set’.

How do I disable BIOS?

Regardless of the case, here’s how to disable the BIOS memory options:

  1. Step 1: Access the BIOS. Restart your computer. Go to the Start menu, click the Power icon, and choose Restart. …
  2. Step 2: Disable Memory Options. Go to the Advanced section by selecting the Advanced option at the top-most part of the screen. Hit Enter.

What is the default Dell BIOS password?

Default Password

Every computer has a default administrator password for the BIOS. Dell computers use the default password “Dell.” If that does not work, do a quick inquiry of friends or family members that have used the computer recently.

How do you unlock BIOS settings?

There are three primary ways to reset your computer’s BIOS or UEFI settings.

How to reset BIOS settings on Windows PCs

  1. Reset internally from your device’s BIOS or UEFI menu. …
  2. Reset by removing and replacing the CMOS battery. …
  3. Clear and reset BIOS settings by clearing your motherboard jumper.

How do you get into the BIOS in Windows 10?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I find my HP BIOS password?

Method 2.

Reset BIOS Password by using a Master Password.

  1. Power on you Laptop and press the corresponding function key to enter into BIOS/CMOS Setup.
  2. Type three (3) times an incorrect password.
  3. You will receive a “System Disabled” message and a digit code.

How do I get into BIOS as administrator?

Go to BIOS Security settings and create a BIOS admin password. 3. You should then be able to edit additional settings, although you may need to log out and then log in as guest and type your new BIOS admin password.

How do I find my administrator password for my computer?

Method 1 – Reset password from another Administrator account:

  1. Log on to Windows by using an Administrator account that has a password that you remember. …
  2. Click Start.
  3. Click Run.
  4. In the Open box, type “control userpasswords2″.
  5. Click Ok.
  6. Click the user account that you forgot the password for.
  7. Click Reset Password.

What is the supervisor password?

4. Supervisor password (BIOS password) The supervisor password protects the system information stored in the ThinkPad Setup program. If you have set a supervisor password, no one can change the configuration of the computer without the password.

How do I reset a password protected BIOS?

Reset BIOS Password

  1. Enter the BIOS password (case sensitive).
  2. Select the ‘Security’ menu and ‘Administrator Password’.
  3. Enter the current BIOS password when asked.
  4. Enter and confirm your new password, or leave this blank.
  5. Select the ‘Exit’ menu.
  6. Select ‘Save Changes and Exit’, then confirm when prompted.

Does a hard Reset erase everything on HP laptop?

No it will not…. hard reset is simply hold down power button 30 seconds with no power supply attached. It is not the same as a cell phone reset.

How do you do a full Reset on a laptop?

Navigate to Settings > Update & Security > Recovery. You should see a title that says “Reset this PC.” Click Get Started. You can either select Keep My Files or Remove Everything. The former resets your options to default and removes uninstalled apps, like browsers, but keeps your data intact.

How do you reset BIOS in Windows 10?

How to reset BIOS settings on Windows PCs

  1. Navigate to the Settings tab under your Start menu by clicking the gear icon.
  2. Click the Update & Security option and select Recovery from the left sidebar.
  3. You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready.