– Perform a Master Reset. Unplug your washer for about one minute. …
– Test the Lid Switch Assembly. …
– See if the Drain Hose is Kinked. …
– Check the Drain Hose or Pump for Clogs. …
– Clean out the Coin Trap. …
– Check the Water Level Control. …
– Schedule Washing Machine Repair.

– Turn the machine off at the powerpoint. …
– Check that the drain hose is not kinked or bent. …
– Now, remove the drain hose from the back of the machine. …
– Run some water through the hose to force the clog out. …
– Once water is steadily running through the washer drain hose, re-attach it to your machine.

Subsequently, Does my Kenmore washer have a reset button?

In reference to your Kenmore washer: Most washer’s can be reset like a personal computer. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

Also, Why is my Kenmore washing machine not draining?

If the washer won’t drain there might be a clogged pump or hose. It’s common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. … If the washer won’t drain the lid switch assembly might be defective. This is a very common problem.

What causes a washing machine to not drain completely?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the the hose being jammed. Whatever the reason is, the water will need to be drained from the washing machine before any work or diagnosis can be done.

Last Review : 12 days ago.


How do I reset my Kenmore front load washer?

– Turn off and unplug the machine. …
– Unlock the control panel by simultaneously pushing and holding down the Options and Select button for 10 seconds if you see a lock icon on the control display.
– Push whichever new options you need, and wait for the control panel to flash and reset the washer’s options.

How do you force a Kenmore washer to drain?

– STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
– STEP 2: Locate the drain hose and water supply hoses.
– STEP 3: Drain the washing machine of water.
– STEP 4: Remove a drain hose clog.
– STEP 5: Remove a drain pump clog.

What do you do when your front load washer won’t drain?

Watch the video on YouTube

How do I troubleshoot my Kenmore washer?

– Washer will not stop when the lid is open. “When you open the lid the washing machine will not stop what it’s doing.”
– Bad lid switch. …
– Water will not drain out of the washer. …
– Clogged waste hose. …
– Bad drain pump. …
– Bad pump motor. …
– Washer does not spin/agitate. …
– Broken drive belt.

How do you manually drain an automatic washing machine?

– Step 1: Turn off the power and lay down towels.
– Step 2: Locate the drain hose at the back of the washing machine.
– Step 3: Drain the water.
– Step 1: Turn off the power and lay down towels.
– Step 2: Locate the drain hose.
– Step 3: Drain the water.
– Step 4: Scrub the filter.

How do you fix a washing machine that won’t drain water?

– Perform a Master Reset. Unplug your washer for about one minute. …
– Test the Lid Switch Assembly. …
– See if the Drain Hose is Kinked. …
– Check the Drain Hose or Pump for Clogs. …
– Clean out the Coin Trap. …
– Check the Water Level Control. …
– Schedule Washing Machine Repair.

What causes a front load washer to not spin?

Front-load washer tubs spin thanks to a drive belt that runs off of the motor. A loose, frayed, or torn belt could be why your washer won’t spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.

How do you unclog a washing machine drain pump?

Watch the video on YouTube

Why is my washing machine not draining completely?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the the hose being jammed. Whatever the reason is, the water will need to be drained from the washing machine before any work or diagnosis can be done.

How do you reset a Kenmore washer?

– Turn off and unplug the machine. …
– Unlock the control panel by simultaneously pushing and holding down the Options and Select button for 10 seconds if you see a lock icon on the control display.
– Push whichever new options you need, and wait for the control panel to flash and reset the washer’s options.

How do you fix a Kenmore washer that won’t drain or spin?

– Perform a Master Reset. Unplug your washer for about one minute. …
– Test the Lid Switch Assembly. …
– See if the Drain Hose is Kinked. …
– Check the Drain Hose or Pump for Clogs. …
– Clean out the Coin Trap. …
– Check the Water Level Control. …
– Schedule Washing Machine Repair.

When my washing machine is draining it overflows?

Aside from having a clogged standpipe, there are a few other reasons why your washing machine drain might overflow, and some of the other most common reasons are: Kinked discharge hose. Drain pipe, not the proper size. … Drain hose from washing machine pushed too far down into the drain pipe.

How do you manually drain a front loading washing machine?

– Step 1: Turn off the power and lay down towels. For safety, unplug the machine. …
– Step 2: Locate the drain hose. …
– Step 3: Drain the water. …
– Step 4: Scrub the filter.

How do you completely drain a washing machine?

– Step 1: Power It Down and Turn Off the Water Supply. Start by powering down your machine. …
– Step 2: See If You Can Drain the Drain Hose. …
– Step 3: Check Out the Drain Pump. …
– Step 4: Drain the Interior Manually If Needed. …
– Step 5: Know When to Call a Professional.

How do I force my Kenmore washer to drain?

– STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
– STEP 2: Locate the drain hose and water supply hoses.
– STEP 3: Drain the washing machine of water.
– STEP 4: Remove a drain hose clog.
– STEP 5: Remove a drain pump clog.

Spread the word ! Don’t forget to share.