– Pour a half cup of baking soda down the drain opening.
– Pour a cup of white vinegar down the drain opening.
– The combined ingredients should foam for five minutes.
– Run the hot water and allow it to run through the drain for a minute or so.

If you’re not a fan of using chemicals, this all-natural solution may help to unclog a bathtub drain. Start by pouring one cup of baking soda down the drain and let it settle for at least five to 10 minutes. Next, pour a cup of white vinegar down the drain and allow the mixture to work its magic.

Subsequently, How do you unclog a severely clogged bathtub?

Watch the video on YouTube

Also, How do you unclog a drain with standing water?

– Clear all the blockage from the drain. …
– Remove all standing water from the sink or tub. …
– Clear the overflow drain if there is one, then plug it with a rag. …
– Begin plunging the drain, pushing in and out. …
– Run hot water down the drain for 5-10 minutes to clear any other blockages.

Can you use Drano in standing water?

If standing water remains, use Drano® Max Gel Clog Remover. It pours straight through the water and attacks the clog directly.

Last Review : 6 days ago.


How do you get rid of standing water in the shower?

Mix together 1 cup of vinegar (distilled white vinegar works best) and 1 cup of baking soda. First, pour boiling water down the drain to loosen; then follow with the baking soda-vinegar mixture and wait 15 minutes. Rinse with more boiling water.

Why does my shower drain always have water in it?

Yes it’s normal and what you want. It’s called a P-trap and the water sitting in there seals out the sewer gasses. … In an empty home or in drains that are infrequently used (such as a basement) you these traps can eventually dry out from evaporation and let sewer gasses seep in.

How do you unclog a drain with standing water naturally?

Pour 1/2 cup of baking soda into the clogged drain. Follow that with 1 cup of vinegar. Baking soda and vinegar dissolve grease and oil. Let the clogged drain sit undisturbed for 15 minutes.

How do you clear a slow draining bathroom drain?

– Step 1: Boil a kettle of water. …
– Step 2: Grab the baking soda. …
– Step 3: Add 1 cup of vinegar to 1 cup of very hot water. …
– Step 4: Cover the drain with a plug and let it sit for 10 minutes. …
– Boil one more kettle of water.

How do you unclog a bathtub with standing water?

– Clear all the blockage from the drain. …
– Remove all standing water from the sink or tub. …
– Clear the overflow drain if there is one, then plug it with a rag. …
– Begin plunging the drain, pushing in and out. …
– Run hot water down the drain for 5-10 minutes to clear any other blockages.

How do you fix a slow draining tub?

– Use baking soda and vinegar (the natural alternative to chemicals).
– Use a commercial (chemical) clog remover.
– Use a plunger.
– Remove the drain stopper to inspect and gain access.
– Use a plumbers’ snake.
– Call a plumber.

Can you put Drano in a tub with standing water?

Deploy Drano. … If standing water remains, use Drano┬« Max Gel Clog Remover. It pours straight through the water and attacks the clog directly.

Can Drano be used to unclog tub?

You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water.

How do you fix a bathtub drain that won’t drain?

– Use baking soda and vinegar (the natural alternative to chemicals).
– Use a commercial (chemical) clog remover.
– Use a plunger.
– Remove the drain stopper to inspect and gain access.
– Use a plumbers’ snake.
– Call a plumber.

How do you fix a severely clogged drain?

– Partially fill the sink with water, then start plunging.
– Vigorously work the plunger up and down several times before quickly pulling it off the drain opening. …
– If plunging doesn’t work, grab the cable auger and go to work under the sink.

What is the best drain opener for standing water?

Best Overall: Drano Max Gel Clog Remover Drano Max Gel Clog Remover comes in 80-ounce bottles, and it’s safe to use on PVC, metal pipes, garbage disposals, and septic systems. Its thick formula cuts through standing water, allowing it to quickly dissolve any clogs, including those caused by hair and soap scum.

What is good for a slow draining tub?

Take one cup of baking soda, one cup of vinegar and one of salt, if you want some extra power, and make sure there’s no water in the tub. Dump the baking soda into the drain, followed by the salt, and finally the vinegar. If everything goes to plan, you should see a lot of froth; satisfying, if nothing else.

Can you use Liquid Plumr in standing water?

Yes. This product is designed to pour through standing water. However, it is formulated to work effectively on slow flowing drains. Therefore, for particularly stubborn clogs that cause standing water in drains, we recommend using Liquid-Plumr® Urgent Clear®.

What do you do when drain cleaner doesn’t work?

If you didn’t use a chemical drain cleaner, try pouring a gallon of hot (almost boiling) water and a quarter cup of Dawn dish detergent (or any de-greasing dish detergent) down the clogged drain. The hot water and de-greasing agent may break up the clog. Get out your trusty plunger.

How do you unclog a drain when Drano doesn’t work?

Baking soda and vinegar may unclog your drain better than Drano ever could. Start by getting rid of the standing water in your drain. If it will go down slowly, just wait until it’s gone. If it isn’t moving, use a cup or a spoon to get it out of there.

[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.