Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.

A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install.

Subsequently, How much does it cost to put in a concrete driveway?

A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install.

Also, Which is cheaper concrete or asphalt driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.

How do I calculate my driveway?

Measure the length and width of the new driveway in feet. Multiply these two numbers together to find the total square footage of the area. For example, a 20- by 40-foot driveway has a total surface area of 800 square feet.

Last Review : 10 days ago.


How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

How do you estimate a driveway?

Start by finding the area of the driveway in square feet. Multiply the length in feet by the width in feet to find the square footage. Next, multiply the area in feet by the depth in feet. Since the depth of a driveway is commonly measured in inches, divide the inch measurement by 12 to find the depth in feet.

What is the best type of driveway?

– Concrete Driveway. Concrete is considered to be the most popular type for a number of reasons. …
– Brick Driveway. Brick driveway has long been a favorite for plenty of homeowners and businesses alike. …
– Asphalt Driveway. …
– Gravel Driveway. …
– Crushed Stone Driveway. …
– Paver Driveway. …
– Basalt Driveway. …
– Cobblestone Driveway.

How much does it cost to pave a 2000 sq ft driveway?

Paving an asphalt driveway costs $4,724 on average, with a typical range between $2,931 and $6,562. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

How do I estimate the cost of a paved driveway?

Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.

How much does it cost to pour 12 yards of concrete?

Cost. Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.

How do you calculate square footage of a driveway?

To calculate square footage, you must Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.

Is it better to pave or concrete a driveway?

Concrete lasts longer, but asphalt driveways are less expensive to install. Asphalt needs more maintenance, but is generally easier to repair. In winter, concrete driveways can suffer damage if you use the wrong de-icing product. Both concrete and asphalt driveways need solid foundations prepared by experts.

How much will my concrete driveway cost?

A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install. Concrete is ideal for getting the look of stone or pavers, without the high cost.

What is the least expensive way to pave a driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice. If you have more wiggle room, you’ll have more choice.

What is the cheapest type of driveway?

Gravel

How much does it cost to put in a driveway?

The cost to put in a new driveway averages $4,426, with a typical range between $2,379 and $6,481. For most types, you can expect to pay $2 to $15 per square foot for materials and installation. Driveway prices depend mostly on the material, which ranges from $1 to $50 per square foot, and the dimensions of the area.

How much does it cost to pave a 50 foot driveway?

Paving an asphalt driveway costs $4,724 on average, with a typical range between $2,931 and $6,562. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

How much does it cost to pave a long driveway?

Driveway Type Cost Per Square Foot
—————- ——————–
Gravel $.50-2
Asphalt $1-5
Concrete $3-10
Pavers or Bricks $10-50

How much will my driveway cost?

The national range for tearing and replacing a driveway is between $6,275 to $8,500. The average is $7,394 for a poured concrete driveway as per Angie’s list members. The average cost is $3,500 to $7,000 which $3 to $10 per hour, roughly. The cost may be higher for long or curved driveways.

[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.