Plan on having a backstop behind your dartboard. This could be cork, soft wood planks, or covered cardboard. You want something that the dart will stick into but won’t show a hole when you pull it out. I used a large piece of heavy cardboard that I covered in dark grey felt.

as such the bristle dartboard has become something of the standard in the dart world, it’s setup measurements of 173 cm or 5 feet 8 inches from the floor to the center of the dartboard or bullseye and 237 cm or 7 feet 9 and ¼ inches from the front of the dartboard to the back of the oche is the de facto answer if you …

Subsequently, What is the best backing for a dart board?

– Viper Defender III Extended Length Dartboard Surround Wall Protector. …
– Cork Dart Board Backer. …
– Viper Defender Backboard & Sisal/Bristle Steel Tip Dartboard Bundle. …
– 36″ Professional Dartboard Backboard, Octagonal. …
– Viper Championship Wood Framed Dartboard Backboard Set, Mahogany Finish.

Also, How big should a dart board backer be?

Jelinek Cork heavy density dart board backer sheets are designed to allow stray darts easy penetration without “bouncing” away and damaging the darts or injuring spectators. Sheets are 24” (approx. 600mm) x 36” (approx. 900mm) in size and are a full 1” (25mm) thick.

What is the height and distance for a dart board?

Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.

Last Review : 17 days ago.


How far is the throw line in darts?

2.36855 m

What can I use to protect my walls from darts?

– By Using a Dartboard Cabinet. A good dartboard cabinet certainly has its benefits. …
– By Using a Dartboard Surround. …
– Wooden Boards. …
– Old Doors. …
– Plywood. …
– Ceiling Tiles. …
– Cardboard. …
– Cork Flooring or Cork Bulletin Board.

What’s between 9 and 11 on a dart board?

For clarity’s sake, here is the way the numbers on a modern, standard dartboard are organized, from the top position going clockwise: 20, 1, 18, 4, 13, 6, 10, 15, 2, 17, 3, 19, 7, 16, 8, 11, 14, 9, 12, 5.

What are the dimensions of a dart board?

The standard dimensions of the dart board are as follows: Double and treble ring inside measurement: 8mm. Bull inside diameter: 12.7mm. Outer bull inside diameter: 31.8mm.

Where do you stand when throwing darts?

But the best stance for playing darts is probably somewhere in the middle – with your torso and shoulders aligned and at an angle somewhere between 45-90° on to the board. Both shoulders should be level and parallel to the ground. Your front foot can stay flat and at an angle that feels comfortable at the toe line.

How do I keep my dart board from drying out?

Find a dishtowel or cotton cloth large enough to cover the board. Soak the cloth thouroughly in clean water,then wring it out thouroughly,so that it is merely damp. Place this damp (NOT wet) clothe over the board and leave it there overnight.

How far do you stand from a dart board in meters?

Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch(237 cm) from the FRONT of the dartboard to the FRONT of the OCHE(Throwing Line). The throwing distance can also be measures as 93.25 inches or 2.37 meters.

What are the dimensions of a dartboard?

Dartboard Measurements The standard dartboard measurement is 18 inches in diameter and has 20 numbered, pie-shaped segments of equal size, plus the bull’s-eye.

How far do you stand away from a dartboard in CM?

Distance from the ground to the Oche Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.

What is the proper way to hold and throw a dart?

There are different types of grips, so try to find one that suits you best. Hold the dart with your index finger and thumb and use your middle finger to support the dart. This is a stable and balanced grip for a great throw. Keep your balanced posture to throw darts straight at the target.

How far is the throw line for darts?

2.36855 m

How do you throw darts accurately consistently?

– Grip. To throw consistent darts, you need a comfortable, natural grip that works for you. …
– Stance. Try keeping the weight of your body on your front foot, leaning slightly forward with the back foot secure on the floor. …
– Release. The throwing action must be smooth with the same arm movement each time. …
– Focus.

How much room do you need for a dart board?

An area 5-feet wide and 11-feet long is the minimum suggested playing space. There are numerous dart board regulations – one of which is dart board height. Height of a dart board is 5 feet, 8 inches from the floor to the center of the bullseye. Dartboard measurements should be easy to determine.

How does Phil Taylor hold his darts?

Phil Taylor’s grip isn’t as complicated. Phil Taylor uses the classic “pencil grip”, which is easy to learn because everyone knows how to hold a pencil. Just substitute your number 2, or lead pencil, or whatever you use for a steel or soft tip dart, because you know Phil Taylor gets into the soft tip action too.

How are you supposed to hold a dart?

Hold the dart with your index finger and thumb and use your middle finger to support the dart. This is a stable and balanced grip for a great throw. Keep your balanced posture to throw darts straight at the target.

[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.