Samsung French Door Refrigerator (RFG28MESL) is one of the flagship products developed by Samsung. The water filter is located in the Refrigerator compartment, between the crisper drawers as shown in the image below.
How to reset the indicator? Install the new water filter (see above), reset the indicator light by pressing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button. If your model has an inside control panel, hold the “Power Cool” and “Fridge” buttons simultaneously for 3 seconds.
Subsequently, How do you clear error codes on Samsung refrigerator?
– Press and Hold Buttons. Holding the “power freeze” and “power cool” buttons and the same time for five seconds works on most Samsung models. …
– Check for Error Codes. …
– The Hard Reset. …
– After the Reset.
Also, How do I turn off the filter light on my Samsung?
To reset the water filter indicator you need to find the multi-function button(s) on your display that controls the filter indicator. Then press and hold the button(s) until the light changes.
How do I turn off the filter light on my Samsung refrigerator?
When the fridge determines that the water filter is nearing the end of it,s life it will illuminate the change filter symbol on the display in red. Once the filter has been replaced press and hold the CHILD LOCK and ICE TYPE buttons simultaneously for 2 seconds. This will turn the filter light back to green.
Last Review : 11 days ago.
How do I turn off the water light on my Samsung refrigerator?
To turn on the dispenser’s LED lamp, press and hold the Cubed Ice button for 3 seconds. The Dispenser LED lamp (under the display) will stay on until it is turned off. To turn off the dispenser LED Lamp, press and hold the Cubed Ice button for 3 seconds again.
How do I reset my Samsung refrigerator freezer?
To reset your Samsung refrigerator and get it out of shop mode, press the power freezer and power cool buttons simultaneously, holding it for a while – for about 2 to 5 seconds. Then release the buttons. The refrigerator would have been reset and the cooling function will resume.
How do you reset the filter light on a Samsung refrigerator?
How to reset the indicator? Install the new water filter (see above), reset the indicator light by pressing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button. If your model has an inside control panel, hold the “Power Cool” and “Fridge” buttons simultaneously for 3 seconds.
How do I turn off the water filter light on my Samsung refrigerator?
When the fridge determines that the water filter is nearing the end of it,s life it will illuminate the change filter symbol on the display in red. Once the filter has been replaced press and hold the CHILD LOCK and ICE TYPE buttons simultaneously for 2 seconds. This will turn the filter light back to green.
How do I reset my Samsung Fridge Freezer?
Holding the “power freeze” and “power cool” buttons and the same time for five seconds works on most Samsung models. These two buttons appear on most Samsung refrigerators. Holding both of them at the same time for several seconds will usually reset the fridge.
How do I reset my Samsung refrigerator control panel?
To reset your Samsung refrigerator control panel, simply press the Power Cool and Power Freeze buttons at the same time, and hold for about 10 seconds until you see the numbers on the display reset.
Where is the water filter located in a Samsung refrigerator?
The water filter on a Samsung side-by-side refrigerator is located in the fresh food side on the right-hand side of the bottom drawer.
How do I change the filter in my Samsung refrigerator?
How do I clear the error code on my Samsung refrigerator?
A power outage will make your Samsung fridge show the errors 1E and or SE. If this is the case, simply press the power save and lighting buttons for 10 seconds and the error will clear. OR. press the fridge and freezer buttons at the same time for 10 seconds to reset the control panel and clear the error code.
How do I turn off the red light on my Samsung refrigerator?
– Open the refrigerator door and ensure that the filter is installed correctly. …
– Find the “Child Lock” and “Ice Type” push buttons on the control panel, if the red indicator light remains illuminated.
How do you reset the temperature on a Samsung freezer?
To change the Freezer’s temperature, touch the Freezer button. Touch the Freezer button until you reach your desired temperature. You can set the temperature between -8 ºF and 8 ºF. The temperature will move 2 ºF with each press.
How do I turn off the light on my Samsung refrigerator?
Touch the Lighting button to turn the dispenser LED lamp (under the display) on or off. The dispenser LED lamp (under the display) will be lit up continuously when Lighting is turned on. Press the Lighting button again to turn off the Lighting.
Where is the filter reset button on a Samsung refrigerator?
Water Filter Indicator Depending on the model you have the light can be either green or blue. To reset the water filter indicator you need to find the multi-function button(s) on your display that controls the filter indicator. Then press and hold the button(s) until the light changes.
How do you unlock the panel on the Samsung refrigerator?
Unlock the control panel on your refrigerator The panel automatically locks after 1 minute of inactivity to avoid accidental contact. You can unlock it by touching and holding the Door Alarm button until you hear a chime; it usually takes about 3 seconds. Dispenser Lock: This feature appears on select models.
How do you remove the filter from a Samsung refrigerator?
[advanced_iframe use_shortcode_attributes_only=”true” src=”about:blank” height=”800″ width=”800″ change_parent_links_target=”a#link1″ show_iframe_as_layer=”external” enable_ios_mobile_scolling=”true”]
Spread the word ! Don’t forget to share.